Pershing II Weapon System - Pershing Professionals Organization

TECHNICAL MANUALOPERATOR'S MANUALTABLE OF CONTENTSINTRODUCTION (p 1-1)SYSTEM DESCRIPTION (p 2-1)MISSILE DESCRIPTION (p 2-9)GROUND SUPPORTEQUIPMENT (p 2-17)TRAINING DEVICES (p 2-72)OPERATIONALPERSHING I1 WEAPONSYSTEM(SYSTEM DESCRIPTION)MAINTENANCE (p 4-1)LOGISTICS (p 4-2)SYSTEM DATA (p 5~1)REFERENCES(p A-1)INDEX (p Index 1)(PERSHING II FIELD ARTILLERY MISSILE SYSTEM)HEADQUARTERS, DEPARTMENT OF THE ARMYJUNE 1986

TECHNICAL MANUALHEADQUARTERS,DEPARTMENT OF THE ARMYWASHINGTON, D.C. I June 1986Operator's ManualPERSHING Il WEAPON SYSTEM(SYSTEM DESCRIPTION)(PERSHING II FIELD ARTILLERY MISSILE SYSTEM)REPORTING ERRORS AND RECOMMENDlNG IMPROVEMENTSYou can help improve this manual. If you find any mistakes or if you know of away to improve the procedures, please let us know. Mail your letter, DA Form2028 (Recommended Changes to Publications and Blank Forms), or DA Form2028-2 located in the back of this manual direct to: Commander, US. ArmyMissile Command, ATTN: AMSMI-LC-ME-PMB, Redstone Arsenal, AL 35898-5238. A reply will be furnished to you.DISTRIBUTION AUTHORIZE0 TO THE DEPARTMENT OF DEFENSE AND 000 CONTRACTORSONLY (SPECIFIC AUTHORIN: SEC. 1217,(a) CHAPTER 4, TITLE 10, US CODE) (SEPTEMBER1985). OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERREO TO: PROJECT MANAG-ER, PERSHING PROJECT OFFICE, ATTN: AMCPM-PE, REOSTONE ARSENAL, AL 35898-5690.DESTRUCTION NOTICE - FOR CLASSIFIED DOCUMENTS, FOLLOW THE PROCEOURES IN 0005200.22-M, INDUSTRIAL SECURIN MANUAL, SECTION 11-19 OR 000 5200.1-R, INFORMATIONSECURIN PROGRAM REGULATION, CHAPTER IX AN0 AR 380-5. FOR UNCLASSIFIEO, LIMITEDDOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT OISGLOSURE OF CONTENTSOR RECONSTRUCTlON OF THE DOCUMENT.CHAPTER 1CHAPTER 2Section IuINTRODUCTION ..................................................................................................EQUIPMENT DESCRIPTION .............................................................................................................................................................................Page1-12- 12- 1Section I1I Missile Description...............................................................................................2-9Section IllSection IVCHAPTER 3CHAPTER 4Ground Support Equipment (GSE) ......................................................................................................................................................................I OPERATIONAL DEPLOYMENT I .........................................................................MAINTENANCE AND LOGISTICS.......................................................................2-1 72-723- 14- 1Section ISection IICHAPTER 5I REFERENCES ILogistics ................................................................................................................uSYSTEM DATA ....................................................................................................................................................................................................................................4- 14-25- 1A- 1Index 1i/(ii blank)

ParaPageList of Abbreviations ............................................................ 1-5 1 -3Maintenance Forms, Records, and Reports ......................... 1-2 1-1Nomenclature Cross-Reference List ...................................... 1-3 1-1Reporting Equipment Improvement Recommendations(EIR) ................................................................................. 1-4 1 -3Safety Considerations ........................................................... 1-6 1 -4Scope ..................................................................................... 1-1 1-11-1. SCOPE.a. Type of Manual, Introduction to the PERSWING II (PII) Field Artillery Missile System. The presentation ofinformation is directed toward personnel who require a general knowledge of the system. This manual containsdescriptions of:e System equipmente Missions and firing rolesPI1 battalion organizationDeploymente Maintenance and logistics.b. References. Information in this manual is presented in general terms. For specific information, referencesare made to other PI1 manuals. See TM 9-1425-386-L, List of Applicable Publications (LOAP) for PERSHING IIField Artillery Missile System. See appendix A for publications that are referenced in this manual but not listed inTM 9-1 425-386-L.NCE FORMS, RECORDS, ANDDepartment of the Army forms and procedures used for equipment maintenance will be those prescribed by DAPAM 738-750, The Army Maintenance Management System (TAMMS). The DA PAM is published in the MaintenanceManagement UPDATE. Units may subscribe to Maintenance Management UPDATE by submitting acompleted DA Form 12-13.1-3. NOMENCLATURE CROSS-REFERENCE LIST.Shortened nomenclature is used in this manual to make the information easier for you to read. Table 1-1 containsa cross-reference between shortened nomenclature and official nomenclature.Table 1- 1. Nomenclature Cross-Reference ListManual NomenclatureBattery control central or BCCCAS site power distribution equipmentChemical agent alarmChemical agent detectorCombat alert status van or CAS vanContact team tool kitDigital repair tool kitEL coverEL tractorElectrical repair shopElectrical shop tool kitOfficial NomenclatureBattery Control Central, Guided Missile, Semitrailer Mounted:(PERSHING 11)GAS Site Power Distribution EquipmentAlarm Unit, Chemical Agent Automatic Alarm, M42Detector Unit, Chemical Agent Automatic Alarm, M43Combat Alert Status Facility, Guided Missile, Semitrailer MountedTool Kit, Guided Missile Maintenance: Contact Team (PERSHING 11)Tool Kit, Guided Missile Maintenance: Digital Repair (PERSHING II)Cover, Erector-LauncherTruck Tractor: Tactical, 8x8, Heavy Expanded Mobility wlcrane, MI 001 orM983Electrical Repair Shop Equipment, Guided Missile System, SemitrailerMountedTool Kit, Guided Missile Maintenance: Electrical Shop (PERSHING II)

TM 9-1 425-386-1 0-11-3. NOMENCLATURE CROSS-REFERENCE LIST - CONTINUED.Table 1 - 1. Nomenclature Cross-Reference List - ContinuedManual NomenclatureFiring site tool kitFirst stageFirst stage aft skirtFirst stage hoisting beamFour-leg slingGeneral support unit tool kit or GSUtool kitGlEU simulatorGuidance and controlladapter or G&CIAsectionLoad test tool kitMechanical repair shopMechanical shop tool kitMechanics and structures tool kitMissile section trainer (MASC)Missile section trainer (MT)Missile simulatorMI001 , truck, tractorM1002, truck, wreckerM200A1, trailerM35A2, truckM818, tractorM871, trailerM925, truckM928, truckM931, tractorM932, tractorM983, tractorM984, recovery vehiclePlatoon control central or PCCPlatoon control central trainer or PCCtrainerRadar section or RSRear area power unit or RAPURear area SCTS filter box assemblyReference scene generation facilityor RSGFReference scene generation facilitytrainer or RSGF trainerRepair parts shopS&A recode test setSecond stageSecond stage ait skirtSecond stage hoisting beamSpecial tools and equipment tool kitStorage maintenance tool kitOfficial NomenclatureErector-Launcher, Guided Missile, Semitrailer Mounted, M1003:(PERSHING I!)Tool Kit, Guided Missile Assembler, Firing Site (PERSHING II)Propulsion Section, Guided Missile, First Stage: (PERSHING II)Aft Skirt Assembly, First StageBeam, Hoisting, GM, First Stage: (PERSHING ll)Sling, 4-Leg, Missile Container and Shelter; (PERSHING II)Tool Kit, Guided Missile Maintenance: GSU, Class V (PERSHING 11)Simulator, MissilelErector-LauncherlGround Integrated Electronics UnitGuidance and ControlIAdapter Section, GM (PERSHING 11)Tool Kit, Guided Missile Maintenance: Test Equipment, Load Test, GroundHandling Equipment (PERSHING II)Mechanical Repair Shop Equipment, Guided Missile System, SemitrailerMountedTool Kit, Guided Missile Maintenance: Mechanical Shop (PERSHING 11)Tool Kit, Guided Missile Maintenance: Mechanics and Structures(PERSHING II)Missile Section Trainer (MASC)Missile Section Trainer (MT)Trainer Simulator, Electronic Module: (PERSHING II)Truck, Tractor: 10-Ton, 8x8, High Mobility, MI001Truck, Wrecker: 10-Ton, 8x8, High Mobility, MI002Trailer, Generator Chassis, l-li2-Ton, 2-Wheel, M200A1Truck, Cargo, 2-112-Ton, 6x6, M35A2Truck, Cargo, 5-Ton, 6x6, M818Semitrailer, Stake, 22-Ton, 4-Wheel, M871Truck, Cargo, 5-Ton, Dropside, 6x6, M925Truck, Cargo, 5-Ton, XLWB, WNV, 6x6, M928Truck, Tractor, 5-Ton, 6x6, M931Truck, Tractor, 5-Ton, 6x6, M932Truck, Tractor, Tactical, 10-Ton, 8x8, High Mobility, M983Truck, Recovery: Tactical, 10-Ton, 8x8, High Mobility, M984Platoon Control Central, Guided Missile, Transportable (PERSHING 11)Trainer, Platoon Control Central, Guided Missile: (PERSHING I!)Radar Section, Guided Missile (PERSHING II)Generator Group, Guided Missile System, Trailer Mounted, OV-81/TSM-150(XO-1)Filter Assembly, Commercial Power, SCTSReference Scene Generation Facility: (PERSHING It)Trainer, Reference Scene Generation Facility, Dismounted (PERSHING II)Repair Parts Shop, Guided Missile System, Semitrailer MountedTest Set, Safe and Arm RecodingPropulsion Section, Guided Missile, Second Stage (PERSHING 11)Aft Skirt Assembly, Second StageBeam, Hoisting, GM, Second Stage: (PERSHING 11)Tool Kit, Guided Missile Maintenance: Special Tools and Equipment(PERSHING 11)Tool Kit, Guided Missile Maintenance: Organizational Storage Maintenance(PERSHING II)

1-3. NOMENCLATURE CROSS-REFERENCE LlST - CONTINUED.Table 1-7. Nomenclature Cross-Reference List - ContinuedManual NomenclatureOfficial NomenclatureSupply and packaginglpreservationshop or P&P shopSystem components test station orSCTSSystem components test station traineror SCTS trainerTwo-leg slingUniversal slingWarhead section or WSSupply and Packaginglpreservation Shop, Guided Missile System,Semitrailer MountedTest Station, Guided Missile System, System Components, SemitrailerMounted, ANTTSM-150 (XO-1)Test Station, Guided Missile System, Training (PERSHING II)Sling, 2-Leg, Container and Propulsion Section: (PERSHING 11)Sling, Reentry Vehicle: (PERSHING II)Warhead Section, Guided Missile: (PERSHING II)1-4. REPORTING EQUIPMENT IMPROVEMENT RECOMMENDATIONS (EIR).If your PERSHING II system needs improvement, let us know. Send us an EIR. You, the user, are the only onewho can tell us what you don't like about your equipment. Let us know why you don't like the design. Put it on anSF 368 (Quality Deficiency Report). Mail it to Commander, U.S. Army Missile Command, AlTN: AMSMI-QA-QM-D, Redstone Arsenal, AL 35898-5290. We'll send you a reply.1-5. LlST OF ABBREVIATIONS.Table 1-2 contains an alphabetical list of abbreviations and symbols used in this manual, with their meanings. Fora complete list of authorized abbreviations, see AR 310-50.Table 1-2. List of AbbreviationsTable 1-2. List of Abbreviations - ContinuedAbbreviation orSymbolMeaningAbbreviation orSymbolMeaningAacANDAPODAPOEARASUATSBCCBtuCASCBCHEFUCONUSCRTcu ftdBdcDCUDSIGSEBWamperealternating currentalphanumeric displayaerial port of debarkationaerial port of embarkationArmy Regulationair servicer unitautomatic test setbattery control centralBritish thermal unitcombat alert statuschemical/biologicalclocked high energy firing unitContinental United Statescathode ray tubecubic footdecibeldirect currentdigital correlator unitdirect supporWgenera1 supportexploding bridgewireECCCSELEMEFSCitG&C/AGlEUGSEGSUHQHzIEUI LAIMSin.kgkHzkmkPaEuropean command and control consolesystemerector-launcherelectromagnetic effectforward support companyfootguidance and controliadapterground integrated electronics unitground support equipmentgeneral support unitheadquartershertzintegrated electronics unitinterface logic assemblyinertial measurement systeminchkilogramkilohertzkilometerkilopascal

1-5. LIST OF ABBREVIATIONS - CONTINUED.Table 1-2. List of Abbreviations - Continued-Abbreviation orSymbolMeaningTable 1-2. List of Abbreviations - ContinuedAbbreviation orSymbolMeaningkphkWIIbLCALSCmM&SMASCMHzmphMTNCSOICORFP&PPACPALPCAPCCPEPLCPODPOEpsikilometer per hourkilowattliterpoundlaunch control assemblylinear shaped chargemetermaintenance and supplymissile assembly simulatedcountdownmegahertzmile per hourmodified tacticalnozzle control systemofficer in chargeoperational readiness floatpackaging and preservationPERSHING airborne computerpermissive action linkpower control assemblyplatoon control centralprotective entrancePERSHING launch computerport of debarkationport of embarkationpounds per square inchpsigPI1qtRAPURCSRFRGURLCURSRSGFRVS&ASCTSSMDCTMTPDUHFUUTVCSWFSWSXLWB"COF%pounds-per-square-inch gagePERSHING IIquartrear area power unitreaction control systemradio frequencyrate gyro unitremote launch control unitradar sectionreference scene generation facilityreentry vehiclesafe and armsystem components test stationshielded mild detonating cordtechnical manualtransient protection deviceultrahigh frequencyunit under testvane control systemwarhead functional simulatorwarhead sectionextra long wheel basedegree Celsiusdegree Fahrenheitpercent1-6. SAFETY CONSIDERATIONS.a. General. Personnel must be familiar with and observe all safety precautions when working on or handlirthe following:Electronic equipmente High-pressure air systemso Hazardous solventsToxic or flammable chemicals.During missile firing preparations, personnel in the area will be limited to those necessary to accomplish the tasDrilling equipment will not be used to modify items containing explosives. See AR 385-1 6 for other general safeprecautions to be observed during training, service practice, and combat. See TM 9-1 115-386-12&P for precations on nuclear warhead operations and handling.b, Initial Blast Area (fig. 1-1). To provide personnel safety from missile blast during firing, personnel aevacuated upon completion of their duties to a barricaded position at least 350 feet (106.7 m) from the missilThe launch key will not be turned until all personnel have reached the proper distance away from the missile. Iloose and flammable items must be removed from the initial blast area before firing.c. Electrical Storms. The missile on the erector-launcher (EL) is susceptible to lightning strikes. The possibilis greatly increased when the missile is vertical. During electrical storms, the missile should be lowered a1personnel should be cleared from the immediate vicinity of the equipment. See TM 9-1300-206 for mainformation about operation in electrical storms.

1-6. SAFETY CONSIDERATIONS - CONTINUED.'"7INITIALBLAST 50'ure 1-1. Initial Blast Aread. Misfire. A misfire condition exists when a missile fails to lift off after the launch sequence INITIATE switchis turned. A misfire after missile battery activation is considered to be an unsafe condition. If a misfire occurs, theunit commander is notified immediately. The unit commander will direct the unit to perform the misfire proceduresin TM 9-1 425-386-1 0-2-1.

CHAPTER 2EQUIPMENT DESCRIPTIONSystem Description .................................................................Missile Description ..................................................................Ground Support Equipment (GSE) ........................................Training Devices .....................................................................STEM DESCRlPTlOEquipment Characteristics, Capabilities, and Features ........Modes of Transportation ........................................................Operational Range ..................................................................Typical Operation ....................................................................Typical Trajectory ....................................................................SectionII IIllIVPara2-12-32-22-42-5Page2-12-92-172-72Page2-12-22-12-22-7-1. EQUIPMENT CHARACTERISTICS, CAPABILITIES, AND FEATURES.The PI1 missile system is a mobile, medium range, surface-to-surface missile system capable of quick reaction tovarious targets. The PI1 missile system's ability to quickly respond to various targets is due to many features.Some of these features are:e Mobilitye Operating environmente Technologye Warhead options.a. .Mobility. The Pll system is mounted on wheeled vehicles. It can operate on improved roads or off the road.b. Operating Environment. The PI! missile system will perform within a wide range of physical conditions,including:Limited visibility due to darkness, fog, or duste Humidity up to 90%e Changes in ambient temperatures and atmospheric pressurese Salt spray in coastal regions.c. Technology. Computers in the missile and EL monitor and control all countdown functions.(1) The PERSHING airborne computer (PAC) is the onboard missile computer. Before launch, it monitorscritical missile functions and communicates with the PERSHING launch computer (PLC). After launch, the PACcontrols in-flight operations such as targeting and stage separation.(2) The PLC is mounted on the EL. Crewmembers monitor and control prelaunch functions using itskeyboard and alphanumeric display (AND).(3) Monitor and control equipment is protected from electromagnetic effects (EME).d. Warhead Options. The airburstisurface burst (ABISB) capability can be selected.-2. OPERATIONAL RANGE.The two-stage PI1 missile is capable of delivering a payload to any range between 60 statute miles (97 km) and1,080 statute miles (1,738 km).

2-3. MODES OF TRANSPORTATION.The Pll missile system is transportable by ground transport, air, rail, or ship. The following ground transport modedescription is limited to forward area equipment.a. Ground Transport Mode. The PI1 missile system uses various wheeled vehicles to transport the major enditems. The forward area equipment is transported as follows:e EL is towed by an M983 or MI001 tractor.e le is transported assembled on the EL without the radar section ( S) and warhead section@RS is carried in the EL pallet cradle.e WS is carried either in its container on an Mi371 trailer towed by an M931 tractor or mated with theRS on the EL in the rotating pallet.a Platoon control central (PCC) is mounted on an M928 cargo truck. The truck tows a trailer-mounted30 kW generator. The generator supplies power to the PCC.e Battery control central (BCC) is towed by an M931 tractor. BCC power is supplied by a trailermounted30 kW generator towed by an M928 cargo truck.e Combat alert status (CAS) van is towed by an M931 tractor.e ANTTRC-184 radio terminal set is mounted on an M35A2 cargo truck that tows two 10 kWgenerators.e Reference scene generation facility (RSGF) is mounted on an M928 cargo truck that tows a 30 kWgenerator. The generator supplies power to the RSGF.See section Ill of this chapter for more information on ground transportation vehicles.b. Air Transport Mode. The PI1 missile system can be transported by C-130, C-141, and C-5A aircraft.c. Rail Transport Mode. The PI1 missile system can be transported on flat, gondola, or US. standard railroadcars.d. Ship Transport Mode. The PI1 missile system can be transported on Mariner, Liberty, and Victory classships.Operation is presented in general terms. Missile assembly and ~ountdown are covered; firing role and missionare not covered.ssembly. The missile sections arrive in shipping containers (see paragraph 2-8 for containerescription). The missile can be assembled with containers on trailers as shown in figure 2-1 or 2-2. The missilealso can be assembled with containers removed from the trailers and placed on the ground as shown in figure 2-3 or 2-4. The missile sections are removed from the containers and assembled on the EL. The WS may betransported either mated to the RS in the EL pallet or in the WS container.For detailed missile assembly procedures, see TM 9-1 425-386-1 0-3-1. For detailed missile disassembly procedures,see TM 9-1425-386-10-3-2. For information on emplacement within limited terrain, see TM 9-1425-386-10-2-1.b. Countdown. The following events occur at a firing position.(1) Emplacement:@@@@Vehicles parkedCables connectedPower source startedEL leveledEL tractor moved.

2-4. TYPICAL OPERATION - CONTINUED.f2) WS mating:e WS placed on EL pallet (if required)* WS electrically mated* WS mechanically mated.(3) Prelaunch operations:@EL controle Inertial measurement system (IMS) warmup* Targetinge EL checkout* IMS ready* Missile power on* Accumulator chargedDigital correlator unit (DCU) test* IMS alinemente WS presets (optional)e Confidence complete* Hot hold (optional)* intent words entered* Ignition enable enteredPermissive action link (PAL) code entered0 Appropriate EL cover panels removed.(4) Launch operations:* Remote selected* Launch area evacuated@(5) Evacuation.Launch sequence initiated* Missile erected* Launch sequence* Lift-off.For more information on countdown operations, see TM 9-1425-399-24-1.

TM 9-1 425-386-1 0-12-4. TYPICAL OPERATION - CONTINUED.RSCONTAINERG&CIACONTAINER1 STSTAGECONTAINER\1 ST STAGECONTAINERCOVER Ell\ ISEMITRAILERRSCONTAINERCOVERG&C/ACONTAINERCOVER2ND STAGECONTAINERCOVERDCONTAINERSEMITRAILERFigure 2-1. Typical Positioning of Vehicles for Missile Assembly(EL Tractor to Roadside of EL)

2-4. TYPICAL OPERATION - CONTINUED.G&C/ACONTAINER,STSTAGE1 ST STAGECONTAINERCOVERRSCONTAINERCOVERG&C/ACONTAINERCOVER2ND STAGECONTAINERCOVERELTRACTORSTAGECONTAINERAUXILIARYVEHICLESEMITRAILERFigure 2-2. Typical Positioning of Vehicles for Missile Assembly(EL Tractor to Curbside of EL)

TM 9-1 425-386-1 0-12-4. TYPICAL OPERATION - CONTINUED.Figure 2-3. Typical Positioning of Containers for Missile Assembly(EL Tractor to Roa

2-4. TYPICAL OPERATION - CONTINUED.COVERFigure 2-4. Typical Positioning of Containers for Missile Assembly(EL Tractor to Curbside of EL)2-5. TYPICAL TRAJECTORY.A typical PI1 missile trajectory is shown in figure 2-5. The three trajectory phases are:a. Boost Phase. This phase occurs from lift-off until the end of powered flight. During this time the PACcontrols:0 First stage separation after burnout0 Second stage ignition0 Second stage separation and thrust termination0 Steering and guidance.b. Midcourse Phase. This phase occurs from the end of powered flight (thrust termination) until reentry to theatmosphere. During this time, the PAC controls the vane control system (VCS) and reaction control system(RCS). These aid guidance of the reentry vehicle (RV).c. Terminal Phase. This phase starts at atmospheric reentry and continues until warhead detonation. ThePAC compares stored target data with data obtained from radar. Using this target data comparison, the PACcontrols the RV fins for final guidance.

TM 9-1 425-386-1 0-12-5. TYPICAL TRAJECTORY - CONTINUED.RVORIENTATION\-8;'--1\/ MIDCOURSEPHASE\\THRUST TERMINATIONRV SEPARATIONPULLDOWNUPDATESTERMINAL GUIDANCE -Figure 2-5. Typical PN Missile Trajectory

Missile ...................................................................................... 2-Missile Sections ................................................................................................................nsions are given in

2-7. MISSILE SECTIONS.a. First Stage. The two main assemblies of the first stage are the aft skirt assembly and rocket motorassembly. Figure 2-7 shows first stage major features.1 AFT SKIRT ASSEMBLY. Cylindrical aluminum assembly that contains aft lift points, VCS, nozzle controlsystem (NCS), aft attach ring, and cables.2 MOVABLE NOZZLE. Directs thrust developed by rocket motor during first stage operation. Nozzleprovides pitch and yaw control during first stage powered flight.NCS. Controls movement of nozzle and provides nozzle position data to PAC.ROCKET MOTOR ASSEMBLY. Filament-wound cylindrical assembly that contains forward lift points,solid propellant, and first stage ignition system. Rocket motor assembly also serves as outer surface offorward section of first stage.FIRST STAGE IGNITION SYSTEM. Allows electrical ignition of first stage rocket motor and preventsinadvertent launch, Ignition system contains igniter, safe and arm (%A) device, initiators, clocked highenergy firing unit (CHEFU), and high voltage cables.FORWARD ATTACH RING. Allows mating of first stage to second stage.FORWARD LIFT POINT. Two lift points allow attachment of first stage hoisting beam so that first stagecan be lifted and moved.CONDUIT COVER ASSEMBLY. Externally mounted cover that routes cables from aft skirt assembly,lengthwise along outside of rocket motor assembly, to inside forward skirt.TAILPLUG CONNECTORS. Allow electrical interface between missile and ground integrated electronicsunit (GIEU) on EL.VCS. Controls movement of two movable fins and provides fin position data to PAC.11 MOVABLE FIN. Two movable fins located opposite each other on the first stage aft skirt. Fins provide rollcontrol during first stage powered flight.

TM 9-1 425-386-1 0-12-7. MISSILE SECTIONS - G12 AFT LIFT POINT. wo lift points allow attachment of first stage hoisting beam so that first stage can belifted and moved.13 FIXED FIN. Two fixed fins lo ed opposite each othe n the first stage aft skirt. Fins provide stabilityduring first stage powered fl14 AFT ATTACH RI . Allows mating of first stage to muth ring assembly on EL.b. Second Stage. The 9 main : semblies of the second s .ge are ths aft skirt assembly aassembly. Figure 2-8 shor -, seconc- stage major features.Figure 2-8. Second Sta e Major FeaturesAFT ATTACH RING. Allows mating of first stage to second stage.FIRST STAGE SEPARATION SYSTEM. Allows separation of first stage from second stage after firststage burnout and before second stage ignition. Separation system contains linear shaped charge (LSC)separation ring, detonators, CHEFU, and high voltage cables.AFT SKIRT ASSEMBLY. Cylindrical aluminum assembly that contains aft lift points, NCS, aft splice ring,and cables.ROCKET MOT0al assembly that contains forward lift points,motor assembly also serves as outer surfaceernally mounted cover that routes cables from aft skirt assembly,otor assembly, to i. Allows electrical ignition of second stage rocket motor. IgnitionFU, and high voltage cables.FORWARD ATTACH RING. Allows mating of second stage to G&C/A,THRUST REVERSAL SYSTEM. Allows second stage reverse thrust to be developed after RV separationso that second starfere with RV flight. Thrust reversal system contains three thrust reversalports, LSC rings,etonating cord (SMDC), thrust reversal manifold, detonators, CHEFU,and high voltage cables.FORWARD LlFT POINT. Two lift points allow attachment of second stage hoisting beam so that secondstage can be lifted and moved.AFT LIFT POINT. Two lift points allow anachment of second stage hoisting beam so that second stagecan be lifted and moved.NCS. Controls movement of nozzle and provides nozzle position data to PAC.MOVABLE NOZZL . Directs thrust developed by rocket motor during second stage operation. Nozzleprovides pitch and yaw control during second stage powered flight.

2-7. MISSILE SECTIONS - CONTINUED.c. G&CIA. The G&C/A consists of the guidance and control (G&C) and the adapter assemblies. Figure 2-9shows G&C/A major features.Figure 2-9. G&C/A Major FeaturesINTEGRATED ELECTRONICS UNlT (IEU). Controls all functions of missile during flight. IEU containsPAC, DCU and IMS.VCS. Controls movement of four fins and provides fin position data to PAC. VCS operates during secondstage powered flight and terminal portion of flight.MISSILE BATTERY. Provides electrical power to electrical/electronic assemblies during flight.G&C SUPPORT STRUCTURE. Conical aluminum assembly wrapped with ablative heatshield. Supportstructure provides mount and protection for internal components.RCS. Provides pitch, yaw, and roll control during midcourse portion of flight.TWO-AXIS RATE GYRO UNlT (RGU). Provides pitch and yaw data to PAC during boost portion of flight.ADAPTER SUPPORT STRUCTURE. Conical aluminum assembly with heat-resistant coating. Supportstructure provides mount and protection for internal components.AFT ATTACH RING. Allows mating of second stage to G&CIA.ORDNANCE ACCESS COVER. Allows access to second stage motor initiators, separation detonators,and thrust reversal detonators.UMBILICAL COVER. Allows automatic closing of RV ground cooling system ducts during flight.RV SEPARATION SYSTEM. Allows separation of RV from adapterlsecond stage at end of poweredflight. Separation system contains LSC separation ring, detonators, CHEFU, and high voltage cables.G&C/A FIN. Four fins provide roll control during second stage powered flight and pitch, yaw, and rollcontrol during terminal portion of flight.QUICK ACCESS SPLICE RING. Allows mating of G&C/A to WS.

2-7. MISSILE SECTIONS - CONTINUED,d. WS. Figure 2-10 shows WS major features.Figure 2-10. WS Major Features1 THREE-AXIS RGU. Provides roll control information during boost phase of flight; provides pitch, yaw,and roll control information during midcourse and terminal phases of flight.2 WS SUPPORT STRUCTURE. Conical aluminum alloy assembly covered with ablative material.3 QUICK ACCESS SPLICE RING. Allows mating RS to WS.4 QUICK ACCESS SPLICE SEGMENT. Ten segments allow mating WS to G&C/A.For more information on the WS, see TM 9-1115-386-12&P.

2-7. MISSILE SECTIONS - CONTINUED,e. RS. The two main assemblies of the RS are the support structure and the radome. Figure 2-1 1 shows RSmajor features.Figure 2-11. RS Major FeaturesNOSE CAP. Seals off forward end of radome and provides protection during reentry.IMPACT FUZE. Used to detonate warhead in surface burst option.STABILIZED ANTENNA. Allows radar unit to transmit and receive radio frequency (RF) energy.SUPPORT STRUCTURE. Conical aluminum assembly wrapped with an ablative heatshield.RADAR UNIT. Provides target site information to PAC for comparison with stored target site information.QUICK ACCESS SPLICE SEGMENT. Eight splice segments allow mating the RS to the WS.IMPACT FUZE. Four fuzes used to detonate warhead in surface burst option.RADOME. Reinforced glass/epoxy shell that covers radar unit antenna. It also acts as heatshield.

G AND STORAGE CONTAIEach PI1 missile section has a container used for shipping and storage. The containers are similar, differingmostly in size and weight. Figure 2-12 shows PI1 shipping and storage containers. Each container has three mainareas:Base assembly that houses and supports the sectionSuspension system that protects the section from shockCover that completes tEach container also has the se general features:rted by truck, aircraft, rail, or shipas covers that are remova le with use of slings and hoistHas storage space for equipment records (except first or second stage aft skirt container)Can be handled with forklift or slingsCan be towed for short distances on skidsCan withstand varied environmental conditionsHas provisions for testing missile section in container (except first or second stage aft skirtcontainer)Has EME protection (except first or second stage aft skirt container).For more information on shipping and storage containers, see TM 9-8140-395-14.G&C/ASECTIONCONTAINERERRADARFIRST ORSECOND STAGEFigure 2-42. PN Shippinand Storage Containers

Eight protective covers are used on the missile sect e orEME. Some also provide safety to personnel and re IY.Figure 2-13 shows the protective covers and shields.1 RS PROTECTIVE COVER SET. StoreRS protective cover - providesdown; protects radome and all6 RS shield assembly - installed on aEME protection.2 G&CIA SHIELD LV. Installed onprovides EME protection. Shield assembly3 FIN PROTECTIVE COVER. Four covers protectprovide protection from p4 LSC PROTECTIVE COVEtest station (SCTS); provides personnel protection frois stored in SCTS.

ortion of G&C/A when G&C/A is on EL; protectswhen G&C/A is on EL; protects ablativeS is mated to RS; provides EME protection. ShieldS in sunny weather to prevent heat absorption.Para2-1 42-292-332-1 52-10.12-1 12-202-1 02-312-1 72-2 12-1 32-1 82-262-242-232-1 62-1 92-342-222-252-282-1 22-30-272-32Page2-272-662-702-312-192-202-392-182-692-362-432-252-382-642-52-512-362-392-222-682-652-69

RECTOR-UUNCHER (EL).is a semitrailer used as a platform to assemble, transport, count, erect, and la nch the PERSHING IIIt is capable of operation either in a platoon or alone. The EL is equipped with a tandem bogie and hightires so that it can operate over rough terrain and muddy or sandy soil. For a detailed description of thesee TM 9-1440-389-10. Figure 2-74 shows EL major features.CURBSIDE VIEWROADSIDE VIEWFigure 2-14. EL Major Features

ERECTOR-LAUNCHER (EL) - CONTINUED.BOOMS. Support missile cradle during erection and recapture of missile.MISSILE CRADLE. Supports missile during transport, erection, and recapture of missile.RETAINING RING SEGMENTS. Used to retain missile in missile cradle during transport.EL PALLET COVER. Protects RS and WS during travel.EL PALLET. Platform used to transport and mate WS and RS.WORK PLATFORM. Work area for mating RV sections.GIEU. Consists of LCA and PCA with protective door.HYDRAULIC CONTROL PANEL. Contains controls and indicators for system hydraulic function.UPLOCK RELEASE MECHANISM. Releases azimuth ring uplock allowing missile recapture.UPLOCK ASSEMBLY. Locks azimuth ring in erect (firing) position.AZIMUTH RING ASSEMBLY. Consists of launch platform, blast deflector, and ring for mating missile.EL POWER SUPPLY. Provides 28 V dc power to EL.MISSILE POWER SUPPLY. Provides 28 V dc power to missile. ,FRONT JACK. Used to raise, lower, and level front of EL.LANDING GEAR. Supports front of EL when EL is detached from tractor and not supported by jacks.HYDRAULIC OIL TANK. Nonpressurized reservoir for hydraulic oil.PROTECTIVE COVERS. Protect G&C/A and RS.REAR JACKS. Used to raise, lower, and level rear of EL.2-18.1/(2-18.2 blank)

2-10.1. EL COVER.The EL cover includes 22 side panels and 16 top panels, which are secured to frames mounted to the EL. Asingle panel is mounted on the blast deflector. Individual panels can be removed quickly for EL maintenance orfor missile erection. The EL cover provides environmental protection for the first stage and second stage missilesections and part of the G&C/A section. For a detailed description of the EL cover, see TM 9-1440-389-10.Figure 2- 14.1 shows the EL cover.Figure 2-1 4.1. EL Cover1 AFT PANEL. Remains in place except for maintenance.2 TOP PANELS. Panels with half hinges removed for missile erection, and panels with rollers storedbehind side panels for missile erection.3 FORWARD SlDE PANELS. Curbside and roadside panels folded outward for missile erection.4 SlDE PANELS. Curbside and roadside panels removed for missile erection.5 AFT SlDE PANELS. Curbside and roadside panels removed for missile erection.

2-1 1. EL TRACTOR.The EL tractor is a 10-ton, 8x8, di sel-powered vehicle. It can pull the missile over improvedsurfaces, such as roads or highways, or over ugh terrain. Power ste ractor operator in steeringfour front wheels. Either the MI001 tractor or the M983 tractor can be used as an EL tractor.a. MlOOl Tractor. Figure 2-15 shows MI0 1 tractor major features. formation on the MlOOltractor, see TM 9-2320-282-10.1 FIFTH WHEEL.2 CRANE. Used to hoist missil3 30 KW GENERATOR. Sup4 SPARE TIRE. For EL tractor.5 PLATFORM. Folds down to provide access to 30 k generator Controls.WER DISTRIBUTION BOX. Has connectors for connecting c7 PLATFORM. Used to remove RS cover.

2-11. EL TRACTOR - COb. M983 Tractor. Figure 2-16 shows M983 tractor major features. For more information on the M983 tractor,see TM 9-2320-279-1 0.Figure 2-16. M983 Tractor1 FIFTH WHEEL. Allows connecting EL to tractor.2 CRANE. Used to hoist missile sections for assembly and disassembly.3 30 KW GENERATOR. Supplies power to EL during tactical operation.4 PLATFORM. Folds down to provide access to 30 k generator controls.5 POWER DISTRIBUTION BOX. Has connectors for connecting cable from 30 kW generator to EL.6 SPARE TIRE. For EL tractor.

The vehicles used to tranroads or rough terrain.M871 trailerM818 540n tractorM931 5-ton tractorM932 5-ton tractorissile sections and grouMI 002 1 0-ton recovery vehicleM984 10-ton recovery vdiesel-powered tomechanical repairPI1 missile sections in their9-2320-272-10. For more inforM818 tractor, see TM 9-23231, and M932 tractors are 54017, 6x6,rical repair shop,871 trailer carriesb. M35A2 Cargo Truck. 7- used as a general supplyvehicle for the firing platoon. 20-209-10-1. Figure 2-18shows the M35A2 cargo truck.

2-12. TRANSPORTATION VEHICLES - CONTINUED.c. M928 Cargo Truck. The M928 is a 5-ton, 6x6, extra-long wheelbase (XLWB) diesel-powered cargo truck.The PCC and RSGF are mounted on M928 cargo trucks. For more information on the M928 truck, see TM9-2320-272-10. Figure 2-19 shows the M928 cargo truck.Figure 2-19. M928 Cargo Truckd. M925 Dropside Cargo Truck. The M925 is a dropside, 6x6, diesel-powered cargo truck used to towthe RAPU and to transport forward support company (FSC) equipmeation on the M925 truck,see TM 9-2320-272-10. Figure 2-20 shows the M925 dropside caFigure 2-20. M925

2-12. TRANSPORTATION VEHICLES - CONTINUED.e. N1002 Recovery Vehicle. The M1002 is a 10-ton, 8x8, diesel-powered truck similar to the Mi001 tractoexcept for:e No fifth wheela No 30 kW generatorLarge storage box for supplies and tools to service Pll system vehiclesa Recovery winch and crane for towing disabled PI1 system vehicles.In some areas, the M984 recovery vehicle is used in place of the M1002. For more information on the M100:recovery vehicle, see TM 9-2320-282-10. Figure 2-21 shows the M1002 recovery vehicle.Figure 2-21. MI002 Recovery Vehiclef. M984 Recovery Vehicle. The M984 is a 10-ton, 8x8, diesel-powered truck similar to the M983 tractor excepfor:* No fifth wheel@ No 30 kW generator* Large storage box for supplies and tools to service PI1 system vehiclesRecovery winch and crane for towing disabled PI1 system vehicles.In some areas, the MI002 recovery vehicle is used in place of the M984. For more information on the M981recovery vehicle, see TM 9-2320-279-10. Figure 2-22 shows the M984 recovery vehicle.Figure 2-22. M984 Recovery Vehicle

2-13. PLATOON CONTROL CENTRAL (PCC).The PCC is a mobile, self-contained command center for a PI1 platoon. The PCC provides a secure location tocontrol and monitor the countdown and firing of up to three PI1 missiles. The PCC equipment is housed in an S-280 facilitized electrical equipment shelter mounted on an M928 cargo truck. Power is supplied to the PCC by atrailer-mounted 30 kW generator. For more information on the PCC, see TM 9-1430-392-10.a. Exterior Features. Figure 2-23 shows PCC major exterior features.ure 2-23. PCC Major Exterior FeaturesANTENNA MAST BASES. Mount radio communication antennas.AIR CONDITIONERS. Two units, each capable of 18,000 Btu cooling, 12,000 Btu heating, andventilation.FACILITIZED SHELTER. Contains PCC equipment.PROTECTIVE ENTRANCE (PE). Provides 5-minute air bath to remove CB contaminants from personnelbefore entering PCC.POWER ENTRY PANEL. Connects power, ground, and telephone cables to PCC.SIGNAL ENTRY PANEL. Connects signal cables to PCC.ELECTRICAL HORN. Alerts personnel that launch is about to take place.

TM 9-1 425-386-1 0-12-13. PLATOON CONTROL CENTRAL (PCC) - CONTINUED.6. Interior Features. Figure 2-24 shows PCC major interior features.CURBSIDE VIEWFigure 2-24. PCC Major Interior Features

2-13. PLATOON CONTROL CENTRAL (PCC) - CONTINUED.TELEPHONE TA-312JPT. Used for telephone communications.COMMUNICATIONS EQUIPMENT RACK. Used to mount radio communications equipment.SIGNAL ENTRY PANEL. Used to connect internal signal cables to external signal cables.POWER ENTRY PANEL. Used to connect power distribution panel to exterior power source, internalground to external grounding cables, telephones to external lines.EMERGENCY PANEL. Provides emergency exit.STORAGE DRAWERS. Store items needed for operation and maintenance, such as countdown tapesand cables.SECURITY CABINETS. Drawers have removable storage cases that can be secured when removed.REMOVABLE SAFE. Stores material and can be removed to secure area.CHEMICAL AGENT ALARM. Alerts personnel when detector triggers alarm unit.CONVERTER. Changes input voltage to 208 V 400 Hz for operation of CB equipment.CONTROL MODULE. Provides single point from which CB system status is monitored.FORWARD ENTRY PANEL. Connects external filter unit, air conditioners, and antennas to internalcomponents.REMOTE LAUNCH CONTROL UNITS (RLCU's). Provide launch capability for three missiles.TELEPHONE TA-312JPT. Used for telephone communications.CHEMICAL AGENT DETECTOR. Triggers alarm unit when chemical agents are detected.POWER DISTRIBUTION PANEL. Provides circuit breaker-protected ac and dc power to components.REMOTE CONTROL CONSOLE. When installed, used with communications system.STATUS DISPLAY PANEL. Displays status of missiles.LAUNCH WINDOW PANEL. Caiculates and displays launch window times for three missiles.ILA. Connects each missile with PCC; controls printers, AND'S, and status display panel; and providescommunications between EL'S and PCC.2-14. BATTERY CONTROL CENTRAL (BCC).The BCC is a mobile, self-contained command center for a PI1 battery. The BCC provides a secure location tocontrol and monitor the countdown and firing of up to three PI1 missiles. The BCC also provides a secureoperating location for command and control of the battery. The BCC equipment is housed in a modified MI006van towed by an M931 tractor. Power is supplied to the BCC by a trailer-mounted 30 kW generator. For moreinformation on the BCC, see TM 9-1430-397-14.

TM 9-1 425-386-1 0-12-14. BATTERY CONTROL CENTRAL (BCC) - CONTINUEa. Exterior Features. Figure 2-25 shows BCC major exterior features.ROADSIDE VIEWFigure 2-25. BCC Major Exterior Features

2-14. BATTERY CONTROL CENTRAL (BCC) - CONTINUED.ANTENNAS AS-1 729lVRC. Whip antennas for radio communications.ANTENNA. Whip antenna for radio communications.ELECTRICAL HORN. Used to alert personnel that launch is about to take place.AIR CONDITIONER. Three units, each capable of 18,000 Btu cooling, 12,000 Btu heating, andventilation.MOUNTING PANEL A2. Used to connect air conditioners and emergency dc power.FILTER UNIT. Contains gas and particulate filters with blower to force filtered air into BCC.MOUNTING PANEL A6. Used to connect whip antenna, filter unit, and electrical horn.MOUNTING PANEL A1 1. Used to connect antenna cables.REAR WORK PLATFORM. Provides work area.MOUNTING PANEL A12. Used to connect antenna cables.LEVELING JACK. Levels BCC during emplacement.SIGNAL ENTRY PANEL A1 5. Used to connect BCC to EL'S of platoon 1, radio terminal set ANITRC-184,and remote antennas.LANDING GEAR. Supports front of BCC.POWER ENTRY PANEL Al. Used to connect power, ground, satellite communications terminalANIMSC-64, CB alarm, switchboard, and facsimile machine cables.LANDING GEAR. Supports front of BCC.STORAGE CABINET. Storage location for PE and other loose items.SIDE PERSONNEL PLATFORM. Platform for PE.PE. Provides 5-minute air bath to remove CB contaminants from personnel before entering BCC.LEVELING JACK. Levels BCC during emplacement.

. Interior Features. Figure 2-26 shows BCC major interior features.

PLOTTER BOARD. Used to record tactical situation data.TELEPHONE TA-312lPT. Used for telephone communications.CHEMICAL AGENT DETECTOR M43. Triggers alarm unit when chemical agents are detected.CHEMICAL AGENT ALARM M42. lerts personnel when detector triggers alarm unit.ntrols air flow to PE.aintenance, such as countdown tapesunications terminal ANIMSC-64 equipment wheninstalled.CH CONTROL CONSOLE. Provides command and launch control capability.L. Used to connect internal signal cables to external cables.SIGNAL ENTRY PANEL. Used to connect internal signal cables to external cables.SECURITY CABINET. Used to store material.CONVERTER. Changes input voltage to 208 V 400 Hz for operation of CB equipment.CONTROL MODULE. Provides single point from which CB system status is monitored.MOUNTING PANEL A6. Used to connect external filter unit, whip antenna, and horn to internalcomponents.A2. Used to connect external filter unit, air conditioners, and backup dc power to. Used to display battery status information.I that provides circuit breaker-protected ac and dceaters used for auxiliary heating of BCC.SECURITY CABINET. Drawers have removable storage cases that can be secured when removed.ERASABLE BOARD. Used for crew notes.BOOKSHELF. Used for book storage.REMOTE CONTROL CONSOLE. When installed, used with communications system.RACKET. Provides capability for additional telephone TA-312lPT.A-31 2lP-T. Used for telephone communications.sed to mount radio communications equipment.e communications.to connect switchboard when installed.The CAS van is mobile, self-contained command center. It provides a secure location to control and monitorthe countdown and firing of up to nine Pll missiles The CAS equipment is housed in a modified MI006 vantowed by an M931 tractor. Power is applied to the C S van by GAS site power distribution equipment. For moreinformation on the CAS van, see TM 9-1430-398-14.

TM 9-1 425-386-1 0-12-15. COMBAT ALERT STATUS (GAS) VAN - CONTINUED.a. Exterior Features. Figure 2-27 shows CAS van major exterior features.Figure 2-27. GAS Van Major Exterior Features

5. (CAS) VAN - CONTINUED.ANTENNAS AS-1729lVRC. Whip antennas for radio communications.ANTENNA. Whip antenna for radio communications.ELECTRICAL HORN. Used to alert personnel that launch is about to take place.AIR CONDITIONER. Three units, each capable of 18,000 Btu cooling, 12,000 Btu heating, andventilation.MOUNTING PANEL A2. Used to connect air conditioners and backup batteries.BATTERY BOX. Houses two 12 V batteries for backup power.FILTER UNIT. Contains gas and particulate filters with blower to force filtered air into CAS van.MOUNTING PANEL A6. Used to connect whip antenna, filter unit, and electrical horn.DING GEAR. Supports front of van.MOUNTING PANEL A1 1. Used to connect antenna cables.REAR WORK PLATFORM. Provides work area.MOUNTING PANEL A12. Used to connect antenna cables.LEVELING JACK. Levels van during emplacement.SIGNAL ENTRY PANEL A14. Used to connect CAS van to EL's of platoon 1, radio terminal setANITRC-184, and remote antennas.SIGNAL ENTRY PANEL A15. Used to connect CAS van to EL's of platoons 2 and 3.LANDING GEAR. Supports front of van.POWER ENTRY PANEL A1. Used to connect power, ground, European Command and Control ConsoleSystem (ECCCS), satellite communications terminal AN/MSC-64, switchboard, and facsimile machinecables.STORAGE CABINET. Storage location for PE and other loose items.SIDE PERSONNEL PLATFORM. Platform for PE.PE. Provides 5-minute air bath to remove CB contaminants from personnel before entering van.G JACK. Levels van during emplacement.

2-15. COMBAT ALERT STATUS (CAS) VAN - CONTINUED.CHEMICAL AGENT DETECTOR M43. Triggers alarm unit when chemical agents are detected.CHEMICAL AGENT ALARM M42. Alerts personnel when detector triggers alarm unit.PE BLAST AIR VALVE. Controls air flow to PE.COMMAND AND LAUNCH CONTROL CONSOLES. Each console provides command and launch controlcapability for three missiles.SIGNAL ENTRY PANEL. Used to connect internal signal cables to external cables.STATUS BOARD. Used to display battery status information.POWER DISTRIBUTION CABINET. Contains panel that provides circuit breaker-protected ac and dcpower to components.CONVERTER. Changes input voltage to 208 V 400 Hz for operation of CB equipment.CONTROL MODULE. Provides single point from which CB system status is monitored.MOUNTING PANEL A6. Used to connect filter unit, whip antenna, and horn to internal components.MOUNTING PANEL A2. Used to connect filter unit, air conditioners, and backup batteries to internalcomponents.SECURITY CABINETS. Used to store material.COMMAND AND LAUNCH CONTROL CONSOLE. Provides command and launch control capability forthree missiles.MAPBOARD. Used to display battery maps.REMOTE CONTROL CONSOLE. When installed, used with communication system.TELEPHONE TA-312lPT. Used for telephone communications.COMMUNICATIONS EQUIPMENT RACK. Used to mount radio communications equipment.ELECTRIC SPACE HEATER. Two portable heaters used for auxiliary heating of van.SWITCHBOARD RECEPTACLE BOX. Used to connect switchboard when installed.RECEPTACLE BOX. Used to connect ECCCS equipment when installed.

2-16. S&A RECODE TEST SET.The S&A recode test set allows testing or changing codes of the first stage ignition enable system. The test set isbattery-powered and portable. It can be used with the first stage on the EL or in its container. For moreinformation on the S&A recode test set, see TM 9-4935-387-14.Figure 2-29. S&A Recode Test Set Major FeaturesCASE. Contains power supply, printed wiring board, and circuits necessary to code or recode first stageignition S&A system.CONTROL PANEL. Contains controls for self-test, code, and recode procedures.BATTERY ADAPTER. Shorting adapter that connects to BATTERY CONNECTOR for test set operation.GROUNDING COUPLER. Provides grounding during code and recode of S&A device when groundingcable is attached to test set.SPECIAL PURPOSE CABLE ASSEMBLIES. Output cable assembly that connects to first stage ignitionenable device; battery cable assembly that connects to battery charger.COVER. Case cover and storage location for special purpose cable assemblies.SELF-TEST ADAPTER. Self-test adapter that connects to OUTPUT CONNECTOR during self-test.GROUND HANDLING EQUIPMENT.Ground handling equipment is used for handling and mating missile sections and aft skirts and handlingbatteries. Ground handling equipment is used with the crane on the MA001 tractor for field handling, with anoverhead crane for maintenance handling, and with a forklift for handling batteries. First and second stagehoisting beams and two-leg, four-leg, and universal slings are carried on the 5401'1 auxiliary vehicle. All otherhandling equipment is located at maintenance facilities. Figure 2-30 shows ground handling equipment. For moreinformation on ground handling equipment, see TM 9-1450-396-14.

TM 9-1 425-386-1 0-12-17. GROUND HANDLING EQUIPMENT - CONTINUED.Figure 2-30. Ground Handling EquipmentFIRST STAGE HOISTING BEAM. Used with two-leg sling to lift first stage. First stage and second stagehoisting beams are alike except for physical size and lifting capacity.TWO-LEG SLING. Used to lift all missile section container covers; used to lift first stage and secondstage hoisting beams.2-37

MENT - CONTINUED.3 UNIVERSAL SLING. Adapts to allow lifting of G&CIA, WS, or RS.4 FOUR-LEG SLING ASSEMBLY. With leg extensions, used to lift PCC, RSGF, and all missile sectioncontainers.5 GUIDED MISSILE SECTION CRADLE. Used to support first or second stage missile section; used withaft skirt holding fixture to mate aft skirt with first or second stage missile section.sed to lift aft skirt from wooden container and place aft skirt on aftith forklift to handle batteries mounted on tractors and CAS van.andling of first or second stage aft skirt.Used to support first or second stage aft skirt.2-18. RADIO TERadio terminal set ANITRC-184, an upgraded version of the ANTTRC-133A, is a high frequency, single sidebandradio set. It is made up of ANIGRC-193 receiver-transmitters and necessary control equipment. The equipment ishoused in a modified 5-280 shelter mounted on a 2-112-ton truck. The ANTTRC-184 is powered by two 10 kWgenerators. These are mounted on a trailer towed by the 2-112-ton truck. Figure 2-31 shows radio terminal setANITRC-184. For more information on the ANITRC-184. see TM 1 l-!X?80-940-14.adio Terminal Set

2-19. SATELLITE COMMUSatellite communications terminal ANIMSC-64 is a tactical UHF satellite communications system. It can transmitand receive hard copy information. The equipment is housed in an S-615 shelter mounted on a 2-112-ton truck.Figure 2-32 shows satellite communications terminal ANIMSC-64. For more information on the ANIMSC-64, seeTM 1 1-5895-1 104-1 0.Figure 2-32. Satellit CommunicationsThe electrical repair shop is a self-contained mobile shop used for operator, organizational, and DSIGS testingand maintenance of electrical components and assemblies used to support PI1 operations. The shop is housed inan M373A2 van. Power is provided by a 60 kW generator mounted on a RAPU. For more information on theelectrical repair shop, see TM 9-4935-394-7 4.

TM 9-1 425-386-1 0-12-20. ELECTRICAL REPAIR SHOP - CONTINUED.a. Exterior Features. Figure 2-33. shows electrical repair shop major exterior features.CURBSIDE VIEWFigure 2-33. Electrical Repair Shop Major Exterior Features

2-20. ELECTRICAL REPAIR SHOP - CONTINUED.AIR CONDITIONER. Three units, each capable of 18,000 Btu cooling, 12,000 Btu heating, andventilation.AIR COMPRESSOR. Provides up to 125 psig air for test and pneumatic tools.AIR RECEIVER BLEED LINE. Exhausts compressed air and moisture from air receiver.CONNECTOR PANEL. Three connector panels supply 3-phase 208 V ac 50160 Hz power to airconditioners.AIR VENT. When opened from inside, provides filtered, outside air.LEVELING JACK AND FOOTPAD. Two leveling jacks and footpads support and level rear end of shop.AUXILIARY CABLE ENTRY PANEL. Provides connection for 50 Hz commercial power source to shop.MAIN CABLE ENTRY PANEL. Used to connect power and ground cables and field telephone lines.LANDING GEAR. Supports front end of shop when disconnected from towing tractor.STORAGE BOX. Storage for power and ground cables and for ground rods.AIR SUPPLY PANEL. Provides external air supply connections.

TM 9-1 425-386-1 0-12-20. ELECTRICAL REPAIR SHOP - CONTINUED.b. Interior Features. Figure 2-34 shows electrical repair shop major interior features.Figure 2-34. Electrical Repair Shop Major Interior Features

ical filters and transient protectionhas bench vise and chassis vise.eaker-protected acins connections forair compressor to provide stable compressed air for pneumaticelectronic counterts under benches.bottles and ELartridge, and testid dip meter, anditer circuit tester,e shop used for operator, organizational, and DSiGS testingernblies used to support PI1 operations. The shop is housedenerator mounted on a RAPU. For more information on the

TM 9-1 425-386-1 0-12-21. MECHANI AL REPAIR SHOP - 60a. Exterior Features. Figure 2-35 shows mechanical repair shop major exterior features.Figure 2-35. Mechanical Rair Shop Major Exterior Features

2-21. MECHANICAL REPAIR SHOP - CONTINUED.AIR CONDITIONER. Three units, each capable of 18,000 Btu cooling, 12,000 Btu heating, andventilation.AIR COMPRESSOR. Provides up to 125 psig air for test and pneumatic tools.AIR RECEIVER BLE D LINE. Exhausts compressed air and moisture from air receiver.CONNECTOR PANE . Three connector panels supply 3-phase 208 V ac 50160 Hz power to airconditioners.AIR VENT. When opened from inside, provides filtered, outside air.LEVELING JACK AND FOOTPAD. Two leveling jacks and footpads support and level rear end of shop.AUXILIARY CABLE ENTRY PANEL. Provides connection for 50 Hz commercial power source to shop.MAIN CABLE ENTRY PANEL. Used to connect power and ground cables and field telephone lines.LANDING GEAR. Supports front end of shop when disconnected from towing tractor.STORAGE BOX. Storage for power and ground cables and for ground rods.AIR SUPPLY PANEL. Provides external air supply connections.

TM 9-1 425-386-1 0-12-21. MECHANICAL REPAIR SHOb. Interior Features. Figure 2-36 shows mechanical repair shop maj

hose assemblies and hose repair. Also pro-air. Also provides storage forf circuit breaker-protected acAlso contains connections forcompressed air for pneumaticprovides storage for tools androvides storage for tools andn nitrogen bottles and ELtester, RS and WS carriageanalyzer tool set, and tooltructural components.test set operation.

2-22. SUPPLY AND PACKAGINGIPRESERVATION (P&P) SHOP.The P&P shop is a self-contained supply office and shop used for packaging and preservation of componentsrequired to support PI1 operations. The shop is housed in an M373A2 semitrailer van. Required electrical poweris provided by a 30 kW generator mounted on a trailer. Shop temperature and humidity are controlled by two18,000 Btu air conditioners. Connections are provided for field telephones. For more information on the P&Pshop, see TM 9-4935-395-1 4.a. Exterior Features. Figure 2-37 shows P&P shop major exterior features.CURBSIDE VIEWFigure 2-37. P8P Shop Major Exterior Features

GiPRESERVATlON (P&P) SHOP - CONTINUED.1 AIR CONDITIONER. Two units, each capable of 18,000 Btu cooling, 12,000 Btu heating, and ventilation.2 CONNECTOR PANEL. Two connector panels supply 3-phase 208 V ac 50160 Hz power to airconditioners.3 AIR VENT. When opened from inside, provides filtered outside air.4 LEVELING JACK AND FOOTPAD. Two leveling jacks and footpads support and level rear end of shop.5 CABLE ENTRY PANEL. Used to connect power and ground cables and field telephone lines.6 LANDING GEAR. Supports forward end of shop when disconnected from towing tractor.7 STORAGE BOX. Storage for power and ground cables and for ground rods.

. Interior Features. Figure 2-38 shows Pure

SUPPLY AND PACKAGINGIPRESERVATION (P&P) SHOP - CONTINUED.BULLETIN BOARD. Office-type board used to post general information.DESK. Used for general office procedures.BOOKRACK. Contains shelves and webbing straps for storage and transportation of corVISUAL CARD INDEX FILE. Contains 81 pullout slide card index files used to store supply records.VACUUM PUMP STORAGE AREA. Single-door storage area for portable vacuum pump used to removeair during packaging procedures.WORKBENCH. General purpose workbench with storage area.BARREL RACK. Contains shelves and webbing straps for storage and transportation of two barrels ofdesiccant.STORAGE CABINET. Two-shelf, general purpose storage cabinet with webbing straps.TAPE DISPENSER. Electrically operated dispenser of hot tape in lengths from 6 to 36 inches, selected in3-inch increments.STENCIL CUTTING MACHINE. Manually-operated, 112-inch, single-character (number or letter) stencilcutter.WORKBENCH. General purpose workbench with storage area for wrecking bar, saw, steel strappingtensioners, and steel strapping sealer.PAPER RACK. Contains two each paper roll holders, paper cutters, and spare paper rolls.ELECTRICAL DISTRIBUTION BOX. provides control and distribution of circuit breaker-protected acpower to lights, convenience outlets, oven, and air conditioners in shop. Also contains connections forfield telephones.STENCIL WASTE DRAWER. Catches and holds punch-out waste from stencil cutting machine.STEEL STRAPPING MACHINE. Circular dispenser mounted on floor next to card file drawers. Feeds outflat steel strapping.BOOKRACK. Three bookracks contain shelves with webbing straps for storage and transportation ofcontents.FILE SAFE. Four-drawer combination safe for storage of materials.CARD FILE. Card file with 2 drawers for supply record storage.OVEN. Single-phase 115 V 50160 Hz thermostatically controlled oven used for drying, preheating, aging,and curing. Heats up to 300" F.REPAIR PARTS SHOP.The repair parts shop is a self-contained mobile facility used for storage of spare assemblies, subassemblies,and spare parts required to support PI1 operations. The shop is housed in an M373A2 semitrailer van. Requiredelectrical power is provided by a 30 kW generator mounted on a trailer. Shop temperature and humidity arecontrolled by two 18,000 Btu air conditioners. Connections are provided for field telephones. For more informationon the repair parts shop, see TM 9-4935-395-14.

TM 9-1 425-386-1 0-12-23. REPAIR PARTS SHOP - CONTINUED.a. Exterior Features. Figure 2-39 shows repair parts shop major exterior features.4BCURBSIDE VlEWROADSIDE VlEWFigure 2-39. Repair Parts Shop Major Exterior Features

2-23. REPAIR PARTS SHOP - CONTINUED.1 AIR CONDITIONER. Two units, each capable of 18,000 Btu cooling, 12,000 Btu heating, and ventilation.2 CONNECTOR PANEL. Two connector panels supply 3-phase 208 V ac 50160 Hz power to airconditioners.3 AIR VENT. When opened from inside, provides filtered outside air.4 LEVELING JACK AND FOOTPAD. Two leveling jacks and footpads support and level rear end of shop.5 CABLE ENTRY PANEL. Used to connect power and ground cables and field telephone lines.6 LANDING GEAR. Supports forward end of shop when disconnected from towing tractor.7 STORAGE BOX. Storage for power and ground cables and for ground rods.

REPAlR PARTS SHOP - CONTINUED.DETONATOR/INITIATOR STORAGE BOX. Lockable storage area for missile detonators and initiators.STORAGE RACK. Ten-shelf, general purpose open storage rack with webbing straps for storage andtransportation of contents.STORAGE RACK. One five-shelf and one nine-shelf general purpose open storage rack with webbingstraps for storage and transportation of contents.STORAGE DRAWER. Sixteen large drawers, six small drawers, and one small shelf for small parts andassemblies.STORAGE RACK. Three-shelf, general purpose open storage rack with webbing straps for storage andtransportation of contents.BOOKRACK. Contains shelves with webbing straps for storage and transportation of contents.ELECTRICAL DISTRIBUTION BOX. Provides control and distribution of circuit breaker-protected acpower to lights, convenience outlets, oven, and air conditioners in shop. Also contains connections forfield telephones.STORAGE RACK. Three-shelf, general purpose open storage rack with webbing straps for storage andtransportation of contents.MOBILE FILE CABINET. General purpose, two-drawer four-wheel file cabinet with locking wheels andworktable.DESK. Used for general office procedures.STORAGE RACK. Five three-shelf and five five-shelf, general purpose, open storage racks with webbingstraps for storage and transportation of contents.STORAGE AREA. Storage area with webbing straps for storage and transportation of mobile file cabinet.

2-24. REFERENCE SCENE GENERATION FACILITY (RSGF).The RSGF is a mobile, self-contained facility used for making target reference scene tape cartridges. The tapecartridges are loaded into the PLC. The RSGF equipment is housed in an S-280 facilitized electrical equipmentshelter mounted on an M928 cargo truck. The truck tows a trailer-mounted 30 kW generator that provides powerfor the RSGF. For more information on the RSGF, see TM 9-1430-388-12.a. Exterior Features. Figure 2-41 shows RSGF major exterior features.Figure 2-41. RSGF Major Exterior Features

2-24. REFERENCE SCENE GENERATION FACILITY (RSGF) - CONTINUED.1 AIR CONDITIONER. Two units, each capable of 18,000 Btu cooling, 12,000 Btu heating, and ventilation.2 FACILITIZED SHELTER. Contains RSGF equipment.3 PE. Provides 5-minute air bath to remove CB contaminants from personnel before entering RSGF.4 POWER ENTRY PANEL. Connects power, ground, and telephone cables to RSGF.

TM 9-1 425-386-1 0-12-24. REFERENCE SCENE GENERATION FACILITY (RSGF) - CONTINUED.b. Interior Features. Figure 2-42 shows RSGF major interior features.i9Figure 2-42. RSGF Major Interior Features

2-24. REFERENCE SCENE GENERATION FACILITY (RSGF) - CONTINUED.STORAGE CABINET. Three cabinets provide storage for technical manuals, tools, and some disc packs.SAFE. Provides storage for system disc pack, target cartridges, operator's log, and other material.EMERGENCY PANEL. Provides emergency exit.CABINET 1A3. Memory cabinet contains two disc drives and storage drawer.CONVERTER. Changes input voltage to 208 V 400 Hz for operation of CB equipment.CHEMICAL AGENT ALARM M42. Alerts personnel when detector triggers alarm unit.CONTROL MODULE. Provides single point from which CB system status is monitored.CHEMICAL AGENT DETECTOR M43. Triggers alarm unit when chemical agents are detected.TELEPHONE TA-312/PT. Used for telephone communications.POWER DISTRIBUTION PANEL. Provides circuit breaker-protected ac and dc power to components.MESSAGE BOARD. Provides space for crew notes.CABINET 1Al. Operator's console contains cartridge tape unit, printer, cathode ray tube (CRT) display,alphanumeric display, keyboard, and 28 V dc power supply.CABINET 1A2. Computer cabinet contains computer control panel, three computer chassis, and storagedrawer.2-25. SYSTEM COMPONENTS TEST STATION (SCTS).The SCTS is a mobile, self-contained facility for DS/GS-level testing and maintenance of PI1 system componentsand assemblies. The SCTS equipment is housed in a modified MI006 van towed by an M931 tractor. Power isapplied to the SCTS by a 60 kW generator mounted on a RAPU. For more information on the SCTS, see TM 9-4935-393-1 4-1 .

TM 9-1 425-386-1 0-12-25. SYSTEM COMPONENTS TEST STATION (SCTS) - CONTINUED.a. Exterior Features. Figure 2-43 shows SCTS major exterior features.ROADSIDE VIEWFigure 2-43. SCTS Major Exterior Features

2-25. SYSTEM COMPONENTS TEST STATION (SCTS) - CONTINUED.PE. Provides 5-minute air bath to remove CB contaminants from personnel before entering SCTS.AIR CONDITIONER. Three units, each capable of 18,000 Btu cooling, 12,000 Btu heating, andventilation.FORWARD CABLE ENTRY PANEL. Contains EME-filtered cable connections for air conditioners andCB filter unit.CB FILTER UNIT. Contains gas and particulate filters with blower to force filtered air into SCTS.REAR WORK PLATFORM. Provides work area for large assemblies.LEVELING JACK. Levels van during emplacement.COMMUNICATION CABLE ENTRY PANEL. Contains EME-filtered cable and headset connections betweeninside and outside of van.SIGNAL CABLE ENTRY PANEL. Contains EME-filtered cable connections between inside and outside ofvan.LANDING GEAR. Supports front of van.POWER CABLE ENTRY PANEL. Contains EME-filtered cable connections for power cables from RAPU.LANDING GEAR. Supports front of van.STORAGE CABINET. Storage location for PE, side work platform, handrails, and canvas bags containingcamouflage support equipment.SIDE PERSONNEL PLATFORM. Platform for PE.LEVELING JACK. Levels van during emplacement.

2-25. SYSTEM COMPONENTS TEST STATION (SCTS) - CONTINUED.FORWARD STORAGE CABINET. Stores adapters used with automatic test set (ATS), cables, self-testjumper caps, and related items.CHEMICAL AGENT ALARM M42. Alerts personnel by audible and visual alarms when chemical agentsare detected.PE BALST VALVE. Controls air flow to PE. Also provides EME-filtered cable connection to PE controlmodule.MOVABLE WORKTABLE. Used as work surface and storage for small items such as headsets andmultimeter.LIFT TRUCK. Used to lift and move heavy components and to remove IEU from G&CIA.REAR STORAGE CABINET. Stores adapters used with ATS and test program disc packs.CHEMICAL AGENT DETECTOR M43. Triggers chemical agent alarm when chemical agents aredetected.CHEMICAL AGENT DETECTOR POWER SUPPLY PS3, Provides power to operate chemical agentdetector.OSCILLOSCOPE. Used during manual testing of units under test (UUT's).POWER DISTRIBUTION CABINET. Provides power distribution, EME filtering, overload protection, andvoltage monitoring.LSC COVERS. Protective covers for LSC used during in-van G&CIA tests.CONVERTER. Converts 3-phase 208 V 60 Hz power to 3-phase 208 V 400 Hz for operation of CBequipment.CB CONTROL MODULE. Contains controls and monitors necessary for operation of CB equipment.HEATER. Two portable electric space heaters that provide additional heating where required.FORWARD CABLE ENTRY PANEL. Contains EME filters and connectors for power distribution to airconditioners and CB filter unit.28-VOLT POWER SUPPLY PSI. Provides 28 V dc to ATS for UUT testing.SIGNAL CABLE ENTRY PANEL. Contains EME-filtered cable connections between inside and outside ofvan.G&CIA DOLLY. Holds G&C/A during in-van testing.DISTORTION MEASUREMENT SET. Used during UUT testing.SELF-TEST CARD STORAGE CABINET. Stores digital adapter self-test cards.COMMUNICATION CABLE ENTRY PANEL. Contains EME-filtered cable and headset connections betweeninside and outside of van.G&C/A BLOWER. Provides forced air cooling for G&C/A during in-van testing.ATS. Computer-controlled test equipment that tests PI1 assemblies.

2-26. REAR AREA POWER UNIT (RAPU).The RAPU is a self-contained, trailer-mounted power station that is towed by an M925 cargo truck. The RAPUprovides power for the SCTS, conditioned air for in-container testing of G&CIA sections, high-pressure air formissile controls and turbine testing, and storage for ground networks cables. Figure 2-45 shows RAPU majorfeatures. For more information on the RAPU, see TM 9-1450-394-14.Figure 2-45. RAPU Major Features1 60 KW GENERATOR. Provides 60 kW 3-phase 115 V ac 60 Hz power to SCTS, G&C!A conditioningassembly, and air servicer unit (ASU).2 ASU. Contains compressor that charges four air receivers, providing reservoir of high-pressure air usedfor missile vane and nozzle tests.3 G&C!A CONDITIONING ASSEMBLY. Provides heated or ambient air for G&C!A section in-containertesting.4 CABLE STORAGE CABINET. Provides storage for cables, ground rods, adapters, tools, and airhoses.5 M796 TRAILER. Modified four-wheel trailer used for mounting components that make up RAPU.

The 30 kW generator is a diesel-engine-driven power source. Its output is 3-phase 1201208 V ac 50160 Hz power.The generator can be skid-mounted or trailer-mounted. The skid-mounted version is mounted on the EL tractor tosupply power to the EL. The trailer-mounted version is mounted on a two-wheeled M200A1 trailer that is towedby either the PCC or RSGF to supply power to them. It is also towed to emplacement sites to provide power tothe BCC, P&P shop, and repair parts shop. Figure 2-46 shows the 30 kW generator. For more information on the30 kW generator, see TM 5-61 15-465-12.Figure 2-46. 30 kW GeneratorTool kits used to maintain the PII system are:a. Contact Team Tool Kit. This kit is used to perform DSiGS maintenance on mechanical and electricalassemblies. The kit is stored in contact team locations. For more information on the contact team tool kit, see SCair Tool Kit. This kit is used to perform DS/GS maintenance on electronic equipment. The kit isstored in the electrical repair shop and the SCTS. For more information on the digital repair tool kit, see SC 5180-92-CL-P23.c. Electrical Shop Tool Kit. This kit is used to perform DS/GS maintenance on electrical equipment. The kit isstored in the electrical repair shop. For more information on the electrical shop tool kit, see SC 5180-92-CL-P22.d. Firing Site Tool Kit. This kit is used to perform missile assembly and disassembly and organizationalmaintenance on firing battery equipment. The kit is stored with firing battery equipment at the discretion of theofficer in charge (OIC). For more information on the firing site tool kit, see SC 5180-92-CL-P21.

2-28. TOOL KITS - CONTINUED.e. General Support Unit (GSU) Tool Kit. This kit contains specialized tools used to bend hydraulic orpneumatic tubes, to etch metal, etc. The kit is stored with rear area equipment at the discretion of the OIC. Formore information on the GSU tool kit, see SC 5180-92-CL-P28.f. Load Test Tool Kit. This kit is used to test slings and lifting devices. The kit is stored in the mechanicalrepair shop. For more information on the load test tool kit, see SC 5180-92-CL-P27.g. Mechanical Shop Tool Kit. This kit is used to perform DSIGS maintenance on mechanical assemblies. Thekit is stored in the mechanical repair shop. For more information on the mechanical shop tool kit, see SC 5180-92-CL-P26.h. Mechanics and Structures Tool Kit. This kit is used to perform DS/GS maintenance on vehicle bodies,metal frames, etc. The kit is stored in the mechanical repair shop. For more information on the mechanics andstructures tool kit, see SC 5180-92-CL-P25.i. Special Tools and Equipment Tool Kit. This kit is used to perform special maintenance on ground handlingequipment. The kit is stored with rear area equipment at the discretion of the OIC. For more information on thespecial tools and equipment tool kit, see SC 5180-92-CL-P29.j. Storage Maintenance Tool Kit. This kit is used to perform organizational maintenance on equipment instorage. The kit is stored with firing battery equipment at the discretion of the OIC. For more information on thestorage maintenance tool kit, see SC 5180-92-CL-P20.2-29. CABLE SETS.The forward area cable set and the rear area cable set are used to electrically connect units of the PI1 missilesystem (PCC to EL, RAPU to SCTS, etc.). For more information on the cable sets, see TM 9-1430-393-14.a. Forward Area Cable Set. The forward area cable set connects forward area equipment. It is stored in theauxiliary vehicle. Figure 2-47 shows forward area cable set major features.

2-29. CABLE SETS - CONTINUED.Figure 2-47. Forward Area Cable Set Major Features1 CABLE ASSEMBLIES 60W43 AND 500W2 THROUGH 500W8. Electrically connect PI1 equipment.2 CABLE ASSEMBLIES 60W101 AND 500W37. Five cable assemblies 60W101 and one cable assembly500W37 used with ground rod sets and ground rod clamps to ground PI1 equipment.3 GROUND ROD SET. Two sets used with cable assemblies 60W101 and ground rod clamps to groundPI1 equipment.4 GROUND ROD CLAMP. Four clamps attach cable assemblies 60W101 to ground rods.5 POWER DISTRIBUTION BOX (EL TRACTOR). Distributes power between 30 kW generator and EL.6 HEADSET. Four headsets for firing platoon communications.7 CABLE REEL. Stores cable assembly 500W6.

TM 9-1 425-386-1 0-12-29. CABLE SETS - CONTINUED.b. Rear Area Cable Set. The rear area cable set connects rear area equipment and is used to perform testson assemblies. It is stored on the RAPU. Figure 2-48 shows rear area cable set major features.Figure 2-48. Rear Area Cable Set Major Features1 CABLE ASSEMBLIES 60W43 AND 5OOWl3 THROUGH 5OOWl9. Electrically connect PI1 equipment.2 DUMMY CONNECTORS 90A12 THROUGH 90A24. Used in self-tests to check PI1 system testequipment.3 CABLE ADAPTERS 90A6 THROUGH 90A11, 90A25, AND 90A26. Used as extension cables for incontainertest of missile.2-30. WARHEAD FUNCTIONAL SIMULATOR (WFS).The WFS is used to verify the PI1 missile before a tactical warhead is mated. The simulator consists of twocables and a dummy connector that provide electrical continuity and simulate a WS. Figure 2-49 shows WFSmajor features. For more information on the WFS, see TM 9-1430-393-14.Figure 2-49. WFS Major Features

2-30. WARHEAD FUNCTIONAL SIMULATOR (WFS) - CONTINUED.1 CABLE ASSEMBLY 500W24. Used with cable assembly 500W25 to electrically connect RS and G&C/A.2 CABLE ASSEMBLY 500W25. Used with cable assembly 500W24 to electrically connect RS and G&ClA.3 DUMMY CONNECTOR 500W25P3. Used with cable assemblies 500W24 and 500W25 to simulate WS.2-31. FAClLlTlZED ELECTRICAL EQUIPMENT SHELTER.The facilitized electrical equipment shelter is a modified S-280 shelter that is used for the PCC and RSGF. Itprovides EME protection and portability of PCC and RSGF equipment. Major shelter items common to the PCCand RSGF are:* Air conditioners* Power entry and distribution panels* Lighting systemCB protection system.For more information on the facilitized electrical equipment shelter, see TM 9-1425-391-14.2-32. 60 KW GENERATOR.The 60 kW generator is a diesel-engine-driven power source. Its output is 3-phase 1201208 V ac 50160 Hz power.The generator can be skid-mounted or trailer-mounted. The skid-mounted version is mounted on the RAPU tosupply power to the SCTS. The trailer-mounted version is mounted on a two-wheeled M200A1 trailer that istowed to emplacement sites to supply power to the electrical and mechanical repair shops. Figure 2-50 showsthe 60 kW generator. For more information on the 60 kW generator, see TM 5-61 15-545-12.Figure 2-50. 60 kW Generator

2-33. GAS SITE POWER DlST TlON EQUIPMENT.CAS site power distribution equipment allows operation of the CAS site with commercial power. The equipment isused to distribute tactical and commercial power at the CAS site. Figure 2-51 shows CAS site power distributionequipment. For more information on CAS site power distribution equipment, see TM 9-1430-393-14.Figure 2-57. CAS Site Power Distribution Equipment

T - CONTINUED.). Distributes 3-phase ac power and 28 V dc power from power distribution boxystem data recorder.POWER DISTRlBUTlONlFlLTER BOX (CAS VAN). Distributes 3-phase ac power from 30 kW generatoror commercial power source to GAS van.POWER DISTRIBUT (CAS PAD). Distributes 3-phase ac power from 60 kW generator ord filter assemblies. Distributes 28 V dc to power distributionlfilter boxV dc to power distribution box (GAS pad).ssemblies electrically connect CAS van to EL GIEU's.mblies electrically connect power distribution/filter box (GASerator and CAS van.CABLE ASSEMBLY 60W101. Two cable assemblies ground power distributionlfilter box (CAS van) to 30kW generator and GAS van.60 KW GENERATOR. Three stationary 60 kW generators provide 3-phase ac power to three powerdistribution boxes (CAS pad).30 KW GENERATOR. Trailer-mounted 30 kW generator provides &phase ac power to power distributionlfilterbox (CAS van).The SCTS filter assembly allows operation of the SCTS with use of commercial power. Figure 2-52 shows SCTSfilter assembly major features. For more information on the SCTS filter assembly, see TM 9-1430-393-14.-52. SCTS Filter Assembly Major Features1 SCTS FlLTE BOX. Distributes 3-p ac power from commercial power source to RAPU power. Used instead of 60 generator to provide power to SCTS.2 CABLE ASSEMBLY 500W11. Two cables electrically connect SCTS filter box to RAPU power distributionbox.3 CABLE ASSEMB 60W101. Grounds SCTS filter box to junction of existing cable assemblies 60W101from SCTS and

. TRAINING DEVICESFirst and Second Stage Countdown Trainers ......................GIEU Simulator .......................................................................Missile Assembly Simulated Count (MASC) MissileSection Trainers ..................................................................Missile Simulator ES-1 ...........................................................Modified Tactical (MT) Missile Section Trainers ..................PCC Trainer............................................................................Trainer ..................................................................................................................................................SCTS TrainerParaPage2-35. MODIFIED TACTICAL (MT) MISSILE SECTION TRAINERS.MT missile section trainers are used for initial and follow-on training in support of missile assembly, missilesection replacement and handling, component replacement, inspection, and preventive maintenance checks andservices (PMCS). These trainers are similar to tactical missile sections in appearance, size, weight, center ofgravity, and function. For training safety, ordnance items have been removed and the RS magnetron has beendisabled. The G&CIA section battery is replaced with a battery simulator. Mating surfaces between sections havebeen. modified to prevent accidental mating with tactical missile sections. In addition, inert training items areused. For more information on the MT missile section trainers, see TM 9-6920-387-14.NT (MASC) MlSSlLE SECTION TRAINERS.MASC missile section trainers are used for initial and follow-on training in support of PII missile assembly, missilesection replacement and handling, service upon receipt (except in-container tests by SCTS), ignition safe andarm checks, coding and recoding of ignition enable, radar section pressurization, system countdown, andmalfunction isolation. Component parts in these trainers are similar to tactical components only in appearance,size, weight, center of gravity, and method of attachment. MASC missile section trainers have only the circuitsrequired to respond as tactical sections during simulated countdown. Mating surfaces do not allow accidentalmating with tactical sections. Software programs used with MASC missile section trainers provide simulatedcountdown and reference scene data. Simulated faults also can be inserted for training in fault isolation. Formore information on MASC missile section trainers, see TM 9-6920-387-14.First and second stage countdown trainers are used for initial and follow-on training in support of missileassembly, missile section replacement and handling, countdown operations, and UUT testing (except controlstests). These trainers are similar to tactical propulsion sections in appearance, size, weight, center of gravity, andmethod of attachment. The trainers do not contain propellant or ordnance items. The first stage trainer alsocontains a simulated S&A cover and nozzle and no fin control hardware. The trainers can be mated with tacticalor trainer G&C/A sections. However, mating surfaces do not allow accidental mating with tactical propulsionsections. For more information on first and second stage countdown trainers, see TM 9-6920-387-14.2-37.1. MISSILE SlMlJLMissile simulator ES-1 is used to train selected personnel in the overall operation of the EL with or without missilesection trainers or a tactical missile. The simulator allows the student to learn countdown procedures for theGIEU, RLCU, and EL operations. Figure 2-53 shows missile simulator ES-1 major features. For more informationon missile simulator ES-1, see TM 9-6920-387-14.

2-37. MISSILE SIMULATOR ES-1 - CONTINUED.Figure 2-53. Missik Simulator ES-7 Major Features1 CARRYING CASE. Provides protection and means of transport for simula ltor components.2 TRAINING TARGET TAPE CARTRIDGE. Provides simulated reference scene information to LCA ofGIEU.3 TRAINING COUNTDOWN TAPE CARTRIDGE. Provides training program information to LCA of GIEU.4 DUMMY CONNECTOR PLUG 20A1 PI. Required for ES-1 training operations without training missilesections. Used to electrically simulate tactical missile.2-38. GlEU SIMULATThe GlEU simulator provides hands-on training and experience in the operation and function of the GIEU andRLCU. The GlEU simulator allows students to perform EL countdown and maintenance operations in a classroomenvironment. Using GlEU controls, the instructor can preset countdown conditions and enter simulatedholds and malfunctions. GIEU simulator controls and indicators function as they would in a tactical countdown.The GlEU simulator also electronically simulates the following EL functions:* Azimuth clampe Hydraulics* Leveling jacks and sensorPallet rotation.

TOR - CONTINUED.The GlEU simulator can operate with a tactical PCC, PCC trainer, or RLCU. Students operating the GlEUsimulator can communicate with PCC, PCC trainer, or RLCU operators by headset intercom. The GIEU simulatoris mounted on casters and can be moved by two persons. Figure 2-54 shows GlEU simulator major features. Formore information on the GlEU simulator, see TM 9-6920-389-14.Figure 2-54. GIEU Simulator Major FeaturesHYDRAULIC CONTROL PANEL. Contains controls and indicators for simulated hydraulic operations.LCA. Tactical assembly that performs same functions as LCA on EL.PCA. Tactical assembly that performs same functions as PCA on EL.CONSOLE. Contains all GlEU simulator components. Mounted on casters for positioning.SIMULATOR BOARD. Electronically simulates azimuth clamp, hydraulic, rotating pallet, and levelingjacks operations.CABLES 500W27 AND 500W28. Power cable 500W27 and RLCU cable 500W28.TAPE CARTRIDGES. Two tape cartridges: one training countdown tape cartridge and one training targetreference scene tape cartridge.POWER SUPPLY PSI. Tactical EL power supply. Provides 28 V dc to GlEU assembly.RLCU. Tactical assembly that performs same functions as RLCU in PCC.

2-39. PCC TRAINER.The PCC trainer provides experience for PI1 personnel in:e Data safeguardse Countdown and status display for up to three missiles0 Alphanumeric display of event sequence for all missilese RLCU deployment and operatione Launch time data entry, automatic computation, and display of launch window datae Printout of hard copy for time-referenced countdown.A separate instructor's console interfaces with the trainer equipment. The instructor uses this console to:Monitor the student's progresse Control previously inserted simulated malfunctionse Activate microprocessor-controlled simulation of missile/RLCU functions8 Control application of power to the trainer.The instructor's console is also compatible with a tactical PCC. Headset communications link the trainer and theinstructor's console. Figure 2-55 shows PCC trainer major features. For more information on the PCC trainer, seeFigure 2-55. PCC Trainer Major FeaturesROADSIDE CONSOLE. Contains equipment located on roadside of tactical PCC, including power distributionpanel, power entry panel, signal entry panel, status display panel, launch window panel, ILA, andthree RLCU's.CURBSIDE CONSOLE. Contains equipment located on curbside of tactical PCC, including storagedrawers, communications equipment rack, security cabinets, and removable safe.INSTRUCTOR CONSOLE. Contains equipment required to control application of power to trainer, activatemicroprocessor-controlled simulation of missile1RLCU functions, control previously inserted simulatedmalfunctions, and monitor student progress.

d during classroom instruction in SGF operation. The trainer consists of tactical RSGFequipment removed from the shelter and mounted on castered frames. Simulated malfunctions can be insertedby loading special software into the RSGF computer. Figure 2-56 shows RSGF trainer major features. For moreinformation on the RS F trainer, see TM 9-6920-388-14.ET. Consists of tactical RSGF power distribution panel.. Consists of tactical RSGF equipment mounted on roadside of shelter, includutercabinet, and memory cabinet.onsists of storage cabinets for technical manuals, tools, and disc packs.14.ation and maintenance of SCTS equipment and UUT's. The SCTSself-test and UUT test procedures in a classroom environment. Specialssible to insert faults that cause simulated ATS analog and digitalth faulty tactical assemblies to aid in fault recognition and response.es. For more information on the SCTS trainer, see TM 9-6920-393-

2-44. SCTS TRAINER - CONTINUED.iner Major Features1 SIGNAL ENTRY PANEL. Contains components of tactical SCTS signal cable entry and communicationcable entry panels. Also holds G CIA blower assembly.2 REAR STORAG INET. Storage for UUT adapters, self-test cards, cables, disc packs, LSC covers,distortion measurement set, and DTU test fixture.

SCTS TRAINER - CONTINUED.ATS. Same as tactical ATS.POWER DISTRIBUTION ASSEMBLY. Consists of SCTS power distribution cabinet and 28 V dc powersupply. Storage for oscilloscope.FORWARD STORAGE CABINET. Storage for same items stored in tactical SCTS forward storagecabinet, such as adapters, cables, and self-test jumper caps. Storage for trainer digital self-test adapter.G&C/A DOLLY. Same as G&C/A dolly used in tactical SCTS. Holds G&C/A during test.ORKTABLE. Used as work surface and storage for small items such as headsets andSame as lift truck used in tactical SCTS. Lifts and moves heavy components.G&CIA CONDITIONING ASSEMBLY. Same as G&C/A conditioning assembly stored on RAPU. Providesheated or ambient air for G&CIA section in-container testing.

CHAPTER 3OPERATIONAL DEPLOYMENTFor information on command and control, firing roles, and missions, see FM 6-1 1 and FM 6-12.CHAPTER 4TENANCE AND LOGISTICSSectionMaintenance ........................................................................... I 4- 1Logistics ................................................................................ II 4-2PageSection I. MAINTENANCEParaCategories of Maintenance ................................................... 4-2 4- 1Maintenance Concept .......................................................... 4-1 4- 1Page4-1. MAINTENANCE CONCEPT.a. General. The PI1 maintenance concept places most of the maintenance responsibility outside of the firingbatteries. This allows the firing batteries to concentrate on fulfilling their primary firing missions. The followingfactors determine how the maintenance will be accomplished:a Status of the ArmyStatus of the firing battery6 Location of the batteryAvailability of parts and toolsa Availability of personnel.b. Peacetime Conditions. During peacetime, the battery on CAS has the highest priority. The CAS batteryperforms only maintenance essential to continual readiness. All other preventive maintenance is deferred untilthe battery is released from this role. Corrective maintenance for the CAS battery normally consists of replacing afaulty assembly. The replacement can come from an operational readiness float (ORF) or the release battery.DSIGS maintenance contact teams from the FSC provide additional support. Batteries not on CAS are maintainedin accordance with their role:@ Pre-CAS - next to assume CAS; has next highest priority6 Maneuver - just released from CAS; next priority after pre-CAS@ Release - maximum maintenance.a. General. The PI1 maintenance concept is carried out by three categories of maintenance:Unit (Organizational) maintenancea Intermediate (DSIGS) maintenancea Depot maintenance.Each category responds to technical problems with personnel technical training and maintenance facilitiesspecific to that category.

4-2. CATEGORIES OF MAINTENANCE - CONTINUED.b. Unit (Organizational) Maintenance. Unit maintenance is provided by the unit using the equipment. Themaintenance is carried out at firing sites and in garrison by personnel in the firing units. Troubleshooting normallyconsists of operator observations of displays, indicators, meters, gages, and general equipment condition.Corrective maintenance is generally limited to replacement of major assemblies (for example, missile sections,LCA, RLCU) or easily replaced items such as indicators. Faulty assemblies are turned over to DSIGS maintenancepersonnel for repair.c. Intermediate (DSIGS) Maintenance. lntermediate maintenance is provided by two support battalion organizations.These are the FSC's and the Maintenance and Supply (M&S) company. An FSC is assigned to eachfield artillery battalion. The FSC can support organizational maintenance facilities or function on its own. It usesthe electrical and mechanical repair shops, SCTS, and RAPU to troubleshoot and repair assemblies. Theseassemblies can be forward or rear area equipment. The M&S company uses the same facilities as the FSC's tomaintain the ORF's. There is one M&S company for each brigade. Items beyond the repair capability of theintermediate-forward (DS) maintenance organization are returned to the theatre class V intermediate-rear (GS)maintenance organization for repair (first stage and second stage propulsion sections) or are returned to depotfor repair.d. Depot Maintenance. Depot maintenance uses tools and test equipment similar to those used by themanufacturer. These enable a depot facility to perform repairs up to and including complete overhaul if required.Depot-repaired items are returned to the supply system.section 11.LOGISTICSMissile Resupply Flow ............................................................ 4-5 4-4Resupply Requisition Flow ..................................................... 4-4 4-3Stockpile-to-Firing Battery Sequence ..................................... -3 4-2-TO-FIRING BATTERY SEQUEThe materiel goes from the manufacturer to a depot for distributiodeployment verification and tests,the prime contractor is responsible for resupply of PI1 equipment.ply channels areused for resupply. Figure 4-1 shows the stockpile-to-firing battery sequence.araPagePRODUCTIONFACILITIESICONUS THEATERI BATTALION I ,FIRING BATTERYRADARSECTIONSGSEMAINTENANCEFORWARD SUPPORTCLASS IXIIPOE -PODORAPOE -APOIG&CIASECTIONSIAMMUNITION APOE I APODIIFigure 4-1. Stockpile-

4-4. RESUPPLY REQUlSlTlRequisitions for missiles and equipment originate within the battaliorouted through the headquarters (HQ) and service battery. The requicontrol agency. Theater depot stocks of PI1 items are established bemissiles and ORF's of GSE are stored as directed by the theater coauthorized stations and depots. Figure 4-2 shows the resupply requisition flow.LEGEND:CLASS Il & IVCLASS VREQUISITIONS REQUISITIONS --.--SUPPLY ,,,,,, SUPPLY

4-5. MISSILE RESUPPLY FLOW.The battalion obtains a resupply of missile sections from the special ammunition supply point. The HQ andservice battery ammunition platoon transports the missile sections. Upon receipt, the missile sections areinspected and tested. An inventory is also conducted. The missile sections are then placed in storage untilrequested by a firing battery. Figure 4-3 shows the missile resupply flow.I SERVICE 1PLATOONI AREAS IFigure 4-3. Missile Resupply Flow

HIPPING AND STOR GE CONTAINERS DATA.Dimensions and weight for each container are listed in table 5-2.Table 5-2. Container DataContainerLengthIn. (m)WidthIn. (m)HeightIn. (m)First or second stage aft skirt 70.5 (1'8)First stage 190 (4.8)Second stage 129 (3.3)97 (2.5)Warhead section 97.75 (2.5)Radar section 78 (2.0)UIPMENT DATA.fixtureManufacturer's part number ........................................................................................................... 13088001Weight .......................................................................................................................... 250 Ib (113.4 kg)umber ........................................................................................................... 11500285eight (less 30 kW generator and power distribution box) ......................................... 275 Ib (124.7 kg)mber ........................................................................................................... 11500280eight ................................................................................................................................ 490 Ib (222.3 kg)Lifting capacity .......................................................................................................... 12,100 Ib (5,488.5 kg)uideManufacturer's part number .................................................................................................... 1 102781 9Lifting capacity ............................................................................................................ 9,200 Ib (4,154.5 kg)sile section cradlember ........................................................................................................... 11500994xtensions) ................................................................................... 230 Ib (104.3 kg)nsions) ...................................................................................... 433 Ib (196.4 kg)............................................................................................... 15,000 Ib (6,803.9 kg)Manufacturer's part number ........................................................................................................... 13088002Weight ............................................................................................................................. 2,172 Ib (985.3 kg)ar section cover setManufacturer's part number ........................................................................................................... 13090182Weight ........................................................................................................................... 77.1 Ib (35.0 kg)r's part number ......................................................................................................... 11500281eight ................................................................................................................................ 380 Ib (172.4 kg)Lifting capacity ....................................................................................................... 12,100 Ib (5,488.5 kg)Manufacturer's part number ..................................................................................................... 13088003Weight .............................................................................................................................. 166 Ib (75.3 kg)

5-3. GROUND HANDLING EQUIPMENT DATA - CONTINUED.Two-leg slingManufacturer's part number ........................................................................................................... 11500991Weight .................................................................................................................................... 83 Ib (37.6 kg)Lifting capacity .......................................................................................................... 15,000 Ib (6,803.9 kg)Universal slingManufacturer's part number ........................................................................................................... 11500282Weight ................................................................................................................................. 45.9 Ib (20.8 kg)Lifting capacity .................................................................................................................. 800 Ib (326.9 kg)30 kW generator set accessory kit (EL tractor)Manufacturer's part number ......................................................................................................... 1 1500458Weight ................................................................................................................................... 20.4 Ib (9.3 kg)30 kW generator set accessory kit (trailer)Manufacturer's part number ........................................................................................................ 13086024Weight ................................................................................................................................... 20.4 Ib (9.3 kg)60 kW generator set accessory kit (RAPU)Manufacturer's part number ........................................................................................................... 11500378Weight ...................................................................................................................................... 12 Ib (5.4 kg) I60 kW generator set accessory kit (trailer)Manufacturer's part number ........................................................................................................... 13155466Weight ...................................................................................................................................... 12 Ib (5.4 kg)

5-4. EL DATA.EL overall dimensions are shown in figure 5-1. Additional equipment data follows the figure.HOIST POINTS20,300 LB (9,207.9 KG)EACH8 DENOTES CENTER OF GRAVITY NOTE:DIMENSIONS SHOWN ARE IN INCHES.METRIC EQUIVALENT IN METERS ISIN PARENTHESES.Figure 5-1. ELWeightsEL with missile ready for road march ............................................................... 39,601 Ib (17,962.7 kg)EL less missile ready for road march .................................................................. 23,165 Ib (10,507.5 kg)Front jack assembly ...................................................................................................... 350 Ib (158.8 kg)LCA ................................................................................................................................. 125 Ib (56.7 kg)PCA ....................................................................................................................................... 85 Ib (38.6 kg)Missile power supply ....................................................................................................... 87 Ib (39.5 kg)EL power supply ................................................................................................................ 87 lb (39.5 kg)Rear jack assembly ........................................................................................................ 370 lb (167.8 kg)Wheel assembly dataWheel size ..................................................................................................................................... 14 x 22.5Tire size ......................................................................................................................................... 18 x 22.5Ply rating .............................................................................................................................................. 16 P~YOperating air pressure .............................................................................................. 55 psig (379 kPa)Wheel and tire assembly weight ............................................................................... 270 Ib (122.5 kg)

5-4. EL DATA - CONTINUED.Hydraulic tank capacity (filled to upper line on sight glass) ............................................ 33 gal (124.9 1)Power requirementsVoltage ....................................................................................... 24 V dc, 1201208 V ac, 3-phase, 4-wireFrequency .................................................................................................................... 50160 Hz t 5 percentPower ......................................................................................................... 30 kW, power factor 80 percentPneumatic requirementsFor hydraulic accumulator (precharge) .............. Two stage 1600 to 1800 psig (1 1,032 to 12,411 kPa)EL emplacement limitationsGround slope .............................................................................................................................................. 6"5-5. FAClLlTlZED ELECTRICAL EQUIPMENT SHELTER DATA.Weight ................................................................................................................................... 3,938 Ib (1,786.2 kg)Length ............................................................................................................................................ 149 in. (3.8 m)Width ................................................................................................................................................. 87 in. (2.2 m)Height ............................................................................................................................................... 88 in. (2.2 m)5-6. PCC DATA.Weight and dimensionsTruck mounted:Weight ............................................................................................................... 34,486 Ib (1 5,642.6 kg)Length .............................................................................................................................. 450 in. (1 0.3 m)Width ............................................................................................................................... 97 in. (2.5 m)Height ................................................................................................................................ 150 in. (3.8 m)PCC only:Weight ...................................................................................................................... 6,675 Ib (3,027.7 kg)Length ................................................................................................................................ 188 in. (4.8 m)Width .................................................................................................................................... 87 in. (2.2 m)Height .................................................................................................................................. 94 in. (2.4 m)Power requirementsAc :Voltage ........................................................................................................... 1201208 V, 3-phase, 4-wireFrequency ............................................................................................................... 50160 Hz t5 percentPower .................................................................................................... 30 k , power factor 80 percentDc:Backup power, 24 V provided by truck battery.

BCC outer dimensions are shown in figure 5-2. Additional equipment data follows the figure.NOTE:DIMENSIONS SHOWN ARE IN INCHES.METRIC EQUIVALENTS (IN PARENTHESES)ARE IN METERS.Figure 5-2. BCC DataPower requirements:Voltage .......................................................................................................................... 1201208 V 30 kWLine frequency ............................................................................................................................ 50160 HzPhase .................................................................................................... 3-phase, 4-wire wye connectedPower at convenience outlets ........................................................................................ 120 V 50160 HzEME attenuation:200 i: 10 kHz ............................................................................................................................ -50 dB21 rt: 0.5 MHz .............................................................................................................................. -60 dBMaximum operational altitude ......................................................................................... 8,000 ft (2,440 m)itrailer van M1006Weight (loaded) ................................................................................................ 38,500 Ib (17,463.3 kg)Tire inflation:Highway ....................................................................................................................... 70 psi (482.7 kPa)Cross-country .............................................................................................................. 45 psi (310.3 kPa)Sand, mud, snow ..................................................................................................... 45 psi (310.3 kPa)Dimensions:Length ............................................................................................................................. 427 in. (1 0.8 m)Width .................................................................................................................................... 96 in. (2.4 m)Height ............................................................................................................................... 140 in. (3.5 m)Fuel tanks full ..................................................................................................... 22,173 Ib (10,057.5 kg)Fuel tanks empty ................................................................................................. 21,353 Ib (9,685.6 kg)ength .................................................................................................................................... 273 in. (6.9 m)idth ........................................................................................................................................ 98 in. (2.5 m)Height ................................................................................................................................... 11 2 in. (2.8 m)

5-7. BCC DATA - CONTINUED.Towing speedsHighway and improved roads ...................................................................................... 50 mph (80 kph)Unimproved roads .............................................................................................................. 20 mph (32 kph)Rough terrain and cross-country ...................................................................................... 10 mph (16 kph)Air conditionerModel ................................................................................................................................................. F1National stock number ................................................................................................... 4120-01 -114-2471Manufacturer's part number ..................................................................................................... 13225E8000Technical manuals ................................................................... TM 5-4120-371 -14, TM 5-4120-371 -24Power requirements (per unit):Voltage .............................................................................................................................................. 208 VLine frequency ............................................................................................................................ 50160 HzPhase .......................................................................................................................................... 3-phaseCurrent (maximum) ........................................................................................................................ 20.8Cooling capacity (per unit) ............................................................................... 18,000 Btulhr (maximum)Heating capacity (per unit) ............................................................................... 12,000 Btulhr (maxiWeight (per unit) ............................................................................................................... 280 Ib (I 27Dimensions (per unit):Width ................................................................................................................................. 17.3 in. (Depth ................................................................................................................................... 20 in. (Height ............................................................................................................................... 4Fire extinguisherCharging chemical ......................................................................................... Mono romotrifluorometCharge ................................................................................................................................ 2-314 Ib (1.3 kg)5-8. CAS VAN DATA.CAS van outer dimensions are shown in figure 5-3. Additional equipment data follows the figure.NOTE:DIMENSIONS SHOWN ARE IN INCHES.METRIC EQUIVALENTS (IN PARENTHESES)ARE IN METERS.Figure 5-3. CAS Van Data

5-8. GAS VAN DATA - CONTINUED.CAS vanPower requirements:Voltage ......................................................................................................................... 1201208 V 30 kWLine frequency ............................................................................................................................ 50160 HzPhase ...................................................................................................... 3-phase, 4-wire wye connectedPower at convenience outlets ..................................................................................... 120 V 50160 HzEME attenuation:200 i 10 kHz ........................................................................................................................... -50 dB21 rt 0.5 MHz .............................................................................................................................. -60 dBMaximum operational altitude ......................................................................................... 8,000 ft (2,440 m)Semitrailer van M1 006Weight (loaded) ............................................................................... Approximately 40,800 Ib (18,506.6 kg)Tire inflation:Highway ..................................................................................................................... 70 psi (482.7 kPa)Cross-country .............................................................................................................. 45 psi (310.3 kPa)Sand, mud, snow .................................................................................................... 45 psi (310.3 kPa)Dimensions:Length .............................................................................................................................. 427 in. (10.8 m)Width ............................................................................................................................... 96 in. (2.4 m)Height .............................................................................................................................. 140 in. (3.5 m)ractor MWeight:Fuel tanks full .................................................................................................. 22,173 Ib (10,057.5 kg)Fuel tanks empty .............................................................................................. 21,353 Ib (9,685.6 kg)Length .............................................................................................................................. 273 in. (6.9 m)Width ...................................................................................................................................... 98 in. (2.5 m)Height ................................................................................................................................... 112 in. (2.8 m)Towing speedsHighway and improved roads ........................................................................................... 50 mph (80 kph)Unimproved roads .............................................................................................................. 20 mph (32 kph)Rough terrain and cross-country ...................................................................................... 10 mph (16 kph)Air conditionerModel .............................................................................................................................................. F18T-2sNational stock number .................................................................................................... 4120-01 -114-2471Manufacturer's part number ..................................................................................................... 13225E8000Technical manuals .................................................................. TM 5-4120-371 -14, TM 5-4120-371 -24PPower requirements (per unit):Voltage .............................................................................................................................................. 208 VLine frequency ............................................................................................................................ 50160 HzPhase ............................................................................................................................................. 3-phaseCurrent (maximum) ............................................................................................................................. 20.8 ACooling capacity (per unit) .............................................................................. 18,000 Btulhr (maximum)Heating capacity (per unit) ............................................................................. 12,000 Btulhr (maximum)Weight (per unit) ............................................................................................................... 280 Ib (127.0 kg)

5-8. CAS VAN DATA - CONTINUED.Dimensions (per unit):Width ................................................................................................................................. 17.3 in. (0.4 m)Depth ................................................................................................................................... 20 in. (0.5 m)Height ............................................................................................................................... 46.5 in. (1.2 m)Fire extinguisherCharging chemical ...........................................................................................Charge .................................................................................................................................5-9. RSGF DATA.Weight and dimensionsTruck mounted:Monobromotrifluoromethane2-314 Ib (1.3 kg)Weight ............................................................................................................ 38,771 Ib (17,586.2 kg)Length .............................................................................................................................. 450 in. (11.4 m)Width .................................................................................................................................. 97 in. (2.5 m)Height ................................................................................................................................ 150 in. (3.8 m)RSGF only:Weight ...................................................................................................................... 7,937 Ib (3,600.2 kg)Length ........................................................................................................................... 188 in. (4.8 m)Width .................................................................................................................................... 87 in. (2.2 m)Height .................................................................................................................................. 94 in. (2.4 m)Power requirementsVoltage .........................................................................................................Frequency ....................................................................................................................Power .......................................................................................................1201208 V ac, 3-phase, 4-wire50160 Hz +-5 percent30 kW, power factor 80 percent5-10. SCTS DATA.SCTS outer dimensions are shown in figure 5-4. Additional equipment data follows the figure.NOTE:DIMENSIONS SHOWN ARE IN INCHES.METRIC EQUIVALENTS (IN PARENTHESES)ARE IN METERS.Figure 5-4. SCTS Data

ATA - CONTINUED.Power requirements:Voltage ....................................................................................................................... 1201208 V 32.5Line frequency ............................................................................................................................ 50160Phase ...................................................................................................... 3-phase, 4-wire wye connectedower at convenience outlets ........................................................................................... 120 V 50160 HzEME attenuation:200 1 10 kHz ...............................................................................................................................-5021 rir: 0.5 MHz ......................................................................................................................................................................................................Maximum operational altitudeLoaded ................................................................................................................. 39,035 Ib (17,706.0 kg)Without camouflage nets (6) ............................................................................. 38,237 Ib (17,344.0 kg)Length .................................................................................................................................. 427 in. (10.8 m)Width ....................................................................................................................................... 96 in. (2.4 m)Height .................................................................................................................................... 140 in, (3.5 m)Weight:Fuel tanks full ..................................................................................................... 22,173 Ib (10,057.5 kg)Fuel tanks empty .................................................................................................. 21,353 Ib (9,685.ngth .................................................................................................................................... 273 in. (6ldth ........................................................................................................................................ 98 in. (2Height .................................................................................................................................... 1 12 in. (2.d improved roads ..................................... . ................................................. 5Unimproved roads ........................................................................................................ 30Rough terrain and cross-country .......................................................................................... 5Model ............................................................................................................................................. F18T-2SNational stock number ..................................................................................................... 4120-01 -1 14-2471Manufacturer's part number ................................................................................................ 13225E8000Technical manuals ....................................................................... TM 5-4120-371 -14, TM 5-4120-371 -24PPower requirements (per unit):Voltage .............................................................................................................................................. 208 VLine frequency ......................................................................................................................... 50160 HzPhase .............................................................................................................................................Current (maximum) .............................................................................................................................ooling capacity (per unit) .................................................................................. 18,000Heating capacity (per unit) ................................................................................. 12,Weight (per unit) ...............................................................................................................Dimensions (per unit):Width ................................................................................................................................. 17.3 in. (0.4 m)Depth ............................................................................................................................... 20 in. (0.5 m)Height ......................................................................................................................... 46.5 in. (1.2 m)

5-10. SCTS DATA - CONTINUED.Chemical agent alarm systemPower requirements:Voltage ....................................................................................................................................... 120i208Line frequency .......................................................................................................................... 50160Phase ........................................................................................................................................ 3-phasePower consumption ......................................................................................................................... 1.5 kFire extinguisherCharging chemical ........................................................................................ MonobromotrifluoromethaneCharge ............................................................................................................................... 2-314 Ib (1.3 kg)ATSManufacturer's part number ........................................................................................................... 13085950Power requirements:Voltage .......................................................................................................... 1201208 V t-5i-10 percentPhase ........................................................................................................................................... 3-phaseLine frequency ................................................................................................. 50160 Hz rt 5 percentPower consumption .......................................................................................................................... 15.6 kWOperational environment:Temperature ................................................................................................. 70°F I: 10°F (21"C I: 5°C)..................................................................................................Relative humidity80 percent (maximum)5-1 1. ELECTRICAL REPAIR SHOP DATA.Electrical repair shop outer dimensions are shown in figure 5-5. Additional equipment data folloNOTE:DIMENSIONS SHOWN ARE IN INCHES.METRIC EQUIVALENTS (IN PARENTHESES)ARE IN METERS.Figure 5-5. Electrical Repair Shop Data

5-1 1. ELECTRICAL REPAIR SHOP DATA - CONTINUED.Air conditionerModel ................................................................................................................................................. F18T-2sNational stock number ..................................................................................................... 4120-01 -114-2471Manufacturer's part number ...................................................................................................... 13225E8000Technical manuals ...................................................................... TM 5-4120-371 -14, TM 5-4120-371 -24PPower requirements (per unit):Voltage .............................................................................................................................................. 208 VLine frequency ............................................................................................................................ 50160 HzPhase ............................................................................................................................................. 3-phaseCurrent (maximum) ............................................................................................................................. 20.8 ACooling capacity (per unit) ................................................................................ 18,000 Btulhr (maximum)Heating capacity (per unit) ................................................................................. 12,000 Btulhr (maximum)Weight (per unit) .......................................................................................................... 280 Ib (127.0 kg)Dimensions (per unit):Width ................................................................................................................................. 17.3 in. (0.4 m)Depth ................................................................................................................................... 20 in. (0.5 m)Height ............................................................................................................................... 46.5 in. (1.2 m)Electrical repair shopPower requirements:120/208 V 60 kW50/60 Hz3-phase, 4-wire wye connected120 V 50/60 Hz8,000 ft (2.4 km)Voltage .........................................................................................................................Line frequency ............................................................................................................................Phase ......................................................................................................Power at convenience outlets ...........................................................................................Maximum operational altitude ...........................................................................................Fire extinguisherCharging chemical ...........................................................................................Charge ..............................................................................................................................Monobromotrifluoromethane2-314 Ib (1.3 kg)Semitrailer van M373A2 modifiedWeight (loaded) ........................................................................................................ 15,106 Ib (6,852.0 kg)Tire inflation:Highway ......................................................................................................................... 50 psi (345 kPa)Cross-country .............................................................................................................. 35 psi (241 kPa)Sand, mud, snow .......................................................................................................... 15 psi (103 kPa)Dimensions:Length .............................................................................................................................. 395 in. (10.0 m)Width ................................................................................................................................ 99 in. (2.5 m)Height ................................................................................................................................ 132 in. (3.4 m)Towing speedsHighway and improved roads .......................................................................................... 50 mph (80 kph)Unimproved roads .............................................................................................................. 20 mph (32 kph)Rough terrain and cross-country ...................................................................................... 10 mph (16 kph)Tractor M931eight ..................................................................................................................... 22,173 Ib (10,057.5 kg)Length .................................................................................................................................... 273 in. (6.9 m)Width ........................................................................................................................................ 98 in. (2.5 m)Height .................................................................................................................................. 112 in. (2.8 m)

5-1 2. MECHANICAL REPAIR SHOP DATA.Mechanical repair shop outer dimensions are shown in figure 5-6. Additional equipment data follows the figure.NOTE:DIMENSIONS SHOWN ARE IN INCHES.METRIC EQUIVALENTS (IN PARENTHESES)ARE IN METERS.Figure 5-6. Mechanical Repair Shop DataAir conditionerModel ................................................................................................................................................. F18T-2sNational stock number .................................................................................................. 4120-01 -114-2471Manufacturer's part number .................................................................................................... 13225E8000Technical manuals ................................................................. TM 5-4120-371 -14, TM 5-4120-371 -24PPower requirements (per unit):Voltage .......................................................................................................................................... 208 VLine frequency ............................................................................................................................ 50160 HzPhase ............................................................................................................................................. 3-phaseCurrent (maximum) ........................................................................................................................... 20.8 ACooling capacity (per unit) ................................................................................. 18,000 Btulhr (maximum)Heating capacity (per unit) ................................................................................ 12,000 Btulhr (maximum)Weight (per unit) ............................................................................................................. 280 Ib (127.0 kg)Dimensions (per unit):Width ............................................................................................................................... 17.3 in. (0.4 m)Depth ................................................................................................................................... 20 in. (0.5 m)Height ............................................................................................................................... 46.5 in. (1.2 m)Fire extinguisherCharging chemical ............................................................................................ MonobromotrifluoromethaneCharge ................................................................................................................................. 2-3/4 Ib (1.3 kg)Mechanical repair shopPower requirements:Voltage .......................................................................................................................... 120/208 V 60 kWLine frequency ........................................................................................................................... 50160 HzPhase ..................................................................................................... 3-phase, 4-wire wye connectedPower at convenience outlets .................................................................................... 120 V 50160 HzMaximum operational altitude ........................................................................................... 8,000 ft (2.4 km)

5-12. MECHANICAL REPAIR SHOP DATA - CONTINUED.Semitrailer van M373A2 modifiedWeight (loaded) .................................................................................................... 15,900 Ibs (7,212.1 kg)Tire inflation:Highway .......................................................................................................................... 50 psi (345 kPa)Cross-country ................................................................................................................. 35 psi (241 kPa)Sand, mud, sno .......................................................................................................... 15ensions:Length .............................................................................................................................. 395 in. (10.0 m)Width .................................................................................................................................... 99 in. (2.5 m)Height ................................................................................................................................ 132 in. (3.4 m)Highway and improved roads ........................................................................................ 50 mph (80 kph)Unimproved roads .............................................................................................................. 20 mph (32 kph)Rough terrain and cross-country ................................................................................. 10 mph (1 6 kph)Tractor M931Weight ...................................................................................................................... 22,173 Ib (1 0,057.5 kg)Length .................................................................................................................................. 273 in. (6.9 m)idth ...................................................................................................................................... 98 in. (2.5 m)Height ................................................................................................................................... 112 in. (2.8 m)P&P shop outer dimensions are shown in figure 5-7. Additional equipment data follows the figure.NOTE:DIMENSIONS SHOWN ARE IN INCHES.METRIC EQUIVALENTS (IN PARENTHESES)ARE IN METERS.Figure 5-7. P&P Shop Data

P DATA - CONTINUED.Model ........................................................................................................................................... F18T-2sNational stock number ..................................................................................................... 4120-01 -114-2471Manufacturer's part number ..................................................................................................... 13225E8000Technical manuals ....................................................................... TM 5-4120-371 -14, TM 5-4120-371 -24PPower requirements (per unit):Voltage .............................................................................................................................................. 20Line frequency ............................................................................................................................ 5Phase .............................................................................................................................................Current (maximum) .............................................................................................................................Cooling capacity (per unit) .................................................................................. 18,000 Btulhr (maximum)Heating capacity (per unit) ................................................................................. 12,000 Btulhr (maximum)eight (per unit) ............................................................................................................... 280 Ib (127.0 kg)Dimensions (per unit):Width .............................................................................................................................. 17.3 in. (0.4 m)Depth ................................................................................................................................... 20 in. (0.5 m)Height ...........................................................................................................................................................................................................................................................................................................................................................Charging chemicalChargeMonobromotrifluoromethane2-314 Ib (1.3 kg)Power requirements:Voltage ......................................................................................................................... 1201208 V 30 kLine frequency ........................................................................................................................... 50160 HzPhase ...................................................................................................... 3-phase, 4-wire wyePower at convenience outlets ........................................................................................... 120 VMaximum operational altitude ........................................................................................... 8,000n M373A2 modifiedWeighvloaded) ......................................................................................................... 15,632 Ib (7,OTire inflation:Highway .......................................................................................................................... 50 psi (345 kPa)Cross-country ................................................................................................................. 35 psi (241 kPa)Sand, mud, snow ....................................................................................................... 15 psi (1 03 kPa)Dimensions:Length .............................................................................................................................. 395 in. (1 0.0 m)Width .................................................................................................................................... 99 in. (2.5 m)Height ................................................................................................................................ 132 in. (3.4 m)Weight .................................................................................................................... 22,173 Ib (10,057.5 kg)Length .................................................................................................................................... 273 in. (6.9 m)idth ........................................................................................................................................ 98 in. (2.5 m)Height .................................................................................................................................... 11 2 in. (2.8 m)Highway and improved roads ...........................................................................................Unimproved roads ............................................................................................................ 20 mph (3Rough terrain and cross-country ................................................................................. 10 mph (150 mph (80 kph)

TM 9-1 425-386-1 0-15-14. REPAIR PARTS SHOP DATA.Repair parts shop outer dimensions are shown in figure 5-8. Additional equipment data follows the figure.NOTE:DIMENSIONS SHOWN ARE IN INCHES.METRIC EQUIVALENTS (IN PARENTHESES)ARE IN METERS.Figure 5-8. Repair Parts Shop Datair conditionerModel .................................................................................................................................................F18T-2SNational stock number ..................................................................................................... 4120-01 -114-2471Manufacturer's part number ................................................................................................ 13225E8000Technical manuals ..................................................................... TM 5-4120-371 -14, TM 5-4120-371 -24PPower requirements (per unit):Voltage .............................................................................................................................................. 208 VLine frequency .......................................................................................................................... 50160 HzPhase ............................................................................................................................................. 3-phaseCurrent (maximum) .......................................................................................................................... 20.8 ACooling capacity (per unit) .................................................................................. 18,000 Btulhr (maximum)Heating capacity (per unit) ............................................................................... 12,000 Btulhr (maximum)Weight (per unit) ............................................................................................................... 280 Ib (127.0 kg)Dimensions (per unit):Width ................................................................................................................................. 17.3 in. (0.4 m)Depth .................................................................................................................................. 20 in. (0.5 m)Height ............................................................................................................................... 46.5 in. (1.2 m)Fire extinguisherCharging chemical ...................................................................................... MonobromotrifluoromethaneCharge ................................................................................................................................. 2-314 Ib (1.3 kg)Repair parts shopPower requirements:Voltage .......................................................................................................................... 1201208 V 30 kWLine frequency ............................................................................................................................ 50160 HzPhase ..................................................................................................... 3-phase, 4-wire wye connectedPower at convenience outlets ........................................................................................... 120 V 50160 HzMaximum operational altitude ........................................................................................... 8,000 ft (2.4 km)

5-14. REPAIR PARTS SHOP DATA - CONTINUED.Semitrailer van M373A2 modifiedWeight (loaded) ........................................................................................................ 13,727 Ib (6,226.5 kg)Tire inflation:Highway .......................................................................................................................... 50 psi (345 kPa)Cross-country ................................................................................................................. 35 psi (241 kPa)Sand, mud, snow .......................................................................................................... 15 psi (103 kPa)Dimensions:Length .............................................................................................................................. 395 in. (10.0 m)Width .................................................................................................................................... 99 in. (2.5 m)Height ............................................................................................................................. 132 in. (3.4 m)Tractor M931Weight ...................................................................................................................... 22,173 Ib (10,057.5 kg)Length .................................................................................................................................. 273 in. (6.9 m)Width ..................................................................................................................................... 98 in. (2.5 m)Height .................................................................................................................................... 112 in. (2.8 m)Towing speedsHighway and improved roads .......................................................................................... 50 mph (80 kph)Unimproved roads .............................................................................................................. 20 mph (32 kph)Rough terrain and cross-country ...................................................................................... 10 mph (16 kph)5-15. RAPU DATA.RAPUManufacturer's part number .......................................................................................................... 11500306Weight .................................................................................................................. 12,820 Ib (5,815.0 kg)Power output:Voltage ....................................................................................................................... 120/208 V 60 kWLine frequency ................................................................................................................................. 60 HzPhase ................................................................................................................................ 3-phase, 4 wyeHigh-pressure air output .................................................................................................... 1300 t 150 psigEME attenuation:200 +- 10 kHz ........................................................................................................................... -50 dB21 +- 0.5 MHz -60 dB.........................................................................................................................TrailerModel ...................................................................................................................................................... M796Manufacturer's part number ..................................................................................................... 11500350Weight .......................................................................................................................... 4,820 Ib (2,186.4 kg)Maximum towed speed:Highway......................................................................................................................Cross-country ..............................................................................................................Tire inflation:Highway ......................................................................................................................Cross-country ...............................................................................................................Sand, mud, snow ........................................................................................................Dimensions:Length (maximum extended) .......................................................................................Length (retracted) ..........................................................................................................Width ..................................................................................................................................Height .............................................................................................................................50 mph (80.5 kph)10 mph (16.1 kph)45 Ib (310.3 kPa)25 Ib (172.4 kPa)25 Ib (172.4 kPa)258.5 in. (6.6 m)210.5 in. (5.4 m)92 in. (2.3 m)42.5 in. (1.1 m)

DATA - CONTINUED.ode1 ......................................................................................................................................... MM-000100anufacturer's part number .................................................................................................... 11500304High-pressure air storage capacity ................................................................. 320 cu ft at 3,000 psigPower requirements:Voltage .............................................................................................................. 120/208 V ac, +28 V dcne frequency ................................,........................................................................................50160 Hzhase ................................................................................................................................ 3-phase, 4 wyet ............................................................................................................................. 600 Ib (272.2 kg)idth ................................................................................................................................. 36 in. (0.9 rn)Height ................................................................................................................................ 34 in. (0.9 rn)Length ............................................................................................................................... 42 in. (1.1 rn)Technical manuals ..................................................................... TM 9-1450-394-14, TM 9-1450-394-24Pitioning assemblynufacturer's part number ........................................................................................................... 11500376ight ................................................................................................................................ 224 Ib (101.6 kg)...................................................................................................................... 208 V ac......................................................................................................................... 50/60 Hzhase ................................................................................................................................ 3-phase, 4 wyearagraph contains tables 5-3 through 5-6, which list the following vehicle data:eights and dimensions@Tire pressureCapacities.Table 5-3. Transportation Vehicles Weights and Dimensions- -Weight Ground WheelVehicle (empty) Height Length Width clearance base20,995 Ib'(9,523.2 kg)15,630 Ib(7,089.6 kg)24,080 Ib(1 0,922.5 kg)27,811 Ib(1 2,615.0 kg)22,173 Ib(1 0,057.5 kg)22,841 Ib(1 0,360.5 kg)38,660 Ib(1 7,535.9 kg)116 in.(3.0 rn)103 in.(2.6 rn)116 in.(3.0 rn)116 in.(3.0 rn)111.8 in.(2.8 rn)111.8 in.(2.8 rn)112 in.(2.8 rn)280 in.2(7.1 rn)358 in.(9.1 rn)329.1 in.(8.4 rn)404.9 in.(10.3 rn)272.6 in.(6.9 rn)286 in.(7.3 rn)351 in.(8.9 rn)97.8 in.(2.5 m)96 in.(2.4 rn)98 in.(2.5 m)98 in.(2.5 rn)98 in.(2.5 rn)98 in.(2.5 rn)96 in.(2.4 m)Variable3---18 in.(0.5 rn)11.5 in.(0.3 rn)11.5 in.(0.3 rn)11.5 in.(0.3 rn)11.5 in.(0.3 rn)24 in.(0.6 m)167 in.(4.2 rn)---179 in.(4.6 rn)215 in.(5.5 m)167 in.(4.2 rn)167 in.(4.2 m)181 in.(4.6 rn)

5-16. TRANSPORTATION VEHICLES DATA - CONTINUED.Table 5-3. Transportation Vehicles Weights and Dimensions - ContinuedWeight Ground .WheelVehicle (empty) Height Length Width clearance baseM984 41,574 Ib 112 in. 377 in. 96 in. 24 in. 210 in.(18,857.7 kg) (2.8 m) (9.6 m) (2.4 m) (0.6 m) (5.3 m)MI001 42,333 Ib 122 in. 337 in. 99 in. 18 in. 244 in.(19,201.9 kg) (3.1 m) (8.6 m) (2.5 m) (0.5 m) (6.2 m)MI 002 41,901 Ib 112 in. 354 in. 99 in. 18 in. 281 in.(19,006.0 kg) (2.8 m) (9.0 m) (2.5 m) (0.5 m) (7.1 m)705 pounds (319.8 kg) less without front winch.* 14 inches (0.4 m) less without front winch.Ground clearance is determined by type of trailer being towed.Table 5-4. Vehicle Performance DataM925 andMI001 andPerformance M818 M928 M931 M932 M983 M984 MI 002Speed (maximum)Front winchCapacityCable length54 mph 52 mph 52 mph 52 mph 57 mph 57 mph 57.4 mph(86.9 kph) (83.7 kph) (83.7 kph) (83.7 kph) (91.7 kph) (91.7 kph) (92.4 kph)20,000 Ib 20,000 Ib None 20,000 Ib 20,000 Ib 20,000 Ib 20,000 Ib(9,071.8 kg) (9,071.8 kg) (9,071.8 kg) (9,071.8 kg) (9,071.8 kg) (9,071.8 kg)Recommended towedload, pintleOn highwayOff highwayPayload (maximum)On highwayOff highway30,000 Ib 30,000 Ib 30,000 Ib 30,000 Ib 20,000 lb 20,000 Ib 11,085 Ib(13,607.8 kg) (13,607.8 kg) (13,607.8 kg) (13,607.8 kg) (9,071.8 kg) (9,071.8 kg) (5,028.1 kg)15,000 Ib 15,000 Ib 15,000 Ib 15,000 Ib 20,000 lb 20,000 lb 11,085 Ib(6,803.9 kg) (6,803.9 kg) (6,803.9 kg) (6,803.9 kg) (9,071.8 kg) (9,071.8 kg) (5,028.1 kg)25,000 Ib 20,000 Ib 55,000 Ib 55,000 Ib 62,000 Ib 52,000 Ib 85,000 Ib(11339.8 kg) (9,071.8 kg) (24,947.6 kg) (24,947.6 kg) (28,122.7 kg) (23,586.8 kg) (38,555.4 kg)15,000 Ib 10,000 Ib 37,500 Ib 37,500 Ib 62,000 Ib 52,000 Ib 85,000 Ib(6,803.9 kg) (4,535.9 kg) (17,009.7 kg) (17,009.7 kg) (28,122.7 kg) (23,586.8 kg) (38,555.4 kg)Table 5-5. Vehicle Tire Pressure DataVehicle Highway Cross-country Mud, Snow, SandM8l8FrontRear80 psig(552 kPa)50 psig(345 kPa)75 psig(518 kPa)60 psig(474 kPa)30 psig(207 kPa)75 psig(518 kPa)25 psig(1 72 kPa)

5-16. TRANSPORTATION VEHICLES DATA - CONTINUED.Table 5-5. Vehicle Tire Pressure Data - ContinuedVehicle Highway Cross-country Mud, Snow, SandM925. M928. M931, and M932Front 80 psig 60 psig 25 psig(552 kPa) (414 kPa) (172 kPa)Rear 50 psig 30 psig 25 psig(345 kPa) (207 kPa) (172 kPa)M983Front 60 psig 35 psig 20 psig(414 kPa) (241 kPa) (138 kPa)Rear 70 psig 40 psig 30 psig(483 kPa) (276 kPa) (207 kPa)M984Front 60 psig 35 psig 20 psig(414 kPa) (241 kPa) (138 kPa)Rear 90 psig 90 psig 90 psig(620 kPa) (620 kPa) (620 kPa)MI 001Front 50 psig 50 psig ----(345 kPa) (345 kPa)Rear 50 psig 50 psig ----(345 kPa) (345 kPa)MI 002Front 50 psig 50 psig ----(345 kPa) (345 kPa)Rear 90 psig 90 psig ----(620 kPa) (620 kPa)Table 5-6. Vehicle CapacitiesM925 and M983 and MlOOl andLocation M818 M928 M931 M932 M984 M 1002Cooling systemCrankcase (less oil filter)Oil filterDifferentials1st front axle2nd front axle32 qt(30.3 1)28 qt(26.5 1)2 qt(1.9 1)12 qt(1 1.3 1)1st rear axle2nd rear axle

5-16. TRANSPORTATION VEHICLES DATA - CONTINUED.Table 5-6. Vehicle Capacities - ContinuedM925 and M983 and MlOOl andLocation M818 M928 M93 1 M932 M984 M1002TransmissionFuel tankWinchFront11 qt* 19 qt 17 qt 19 qt 31 qt 33.8 qt(10.4 1) (18.0 1) (16.0 1) (18.0 1) (29.3 1) (31.9 1)110 gal 81 gal 116 gal 116 gal 154 gal 105 gal(416.0 1) (306.0 1) (439.0 1) (439.0 1) (583.0 1) (397.0 1)Rear* Capacity is 9 quarts without a power takeoff (PTO) gearbox.5-21 l(5-22 blank)

CHAPTER 5SYSTEM DATABCC Data ................................................................................CAS Van Data ........................................................................EL Data ...................................................................................Electrical Repair Shop Data ..................................................Facilitized Electrical Equipment Shelter Data .......................Ground Handling Equipment Data .........................................Mechanical Repair Shop Data ...............................................Missile Data .............................................................................P&P Shop Data ......................................................................PCC Data ................................................................................RAPU Data ..............................................................................Repair Parts Shop Data .........................................................RSGF Data ..............................................................................SCTS Data ..............................................................................Shipping and Storage Containers Data ................................Transportation Vehicles Data .................................................ParaPage5-1. MISSILE DATA.Dimensions and weight for each missile section and for the entire missile are listed in table 5-1.Table 5-7. Missile DataMissileSectionsLength Diameter In. (m) WeightIn. (m) Max. Min. Lb (kg)First stageSecond stageG&CIA sectionWarhead sectionRadar sectionMissile

APPENDIX AREFERENCESSee TM 9-1425-386-L, List of Applicable Publications (LOAP) for PERSHING II Field Artillery Missile System.A-1 /(A-2 blank)

AAbbreviations. list of ....................................ANIMSC.64. satellite communicationsterminal .......................................................ANflRC.184. radio terminal set .................BBattery control central (BCC):Data ...........................................................Description ................................................BCC data ...................................................CCable sets .....................................................Capabilities. and features. equipmentcharacteristics ..... ....................................CAS site power distribution equipment ........CAS van data ..............................................Categories of maintenance ..........................Combat alert status (CAS) van:Data ...........................................................Description ................................................Communications. satellite. terminalANIMSC- 64Containers. shipping and storage:.................................................Data ...........................................................Description ................................................Countdown trainers. first and second stageCover. EL ......................................................Covers and shields. missile sectionprotective ....................................................Cross-reference list. nomenclature ..............Data (See specific item.)Deployment. operational (Chapter 3) ...........EEL cover .......................................................EL data .........................................................EL tractor ......................................................Electrical repair shop:Data ...........................................................D................................................DescriptionEquipment characteristics. capabilities. andfeatures .......................................................Erector-launcher (EL):Data ...........................................................Description ................................................FFacilitized electrical equipment shelter:Data ...........................................................Description ................................................Features. equipment characteristics.capabilities. and .........................................Filter assembly. SCTS ................................First stage countdown trainer .....................Generator:30 kW .......................................................60 kW .......................................................GIEU simulator .............................................GParagraph PageGround handling equipment:Data ...........................................................Description ................................................Kits. tool .......................................................LList of abbreviations ....................................Maintenance:Categories of ............................................Concept.....................................................Maintenance forms. records. and reports ..Mechanical repair shop:Data ...........................................................Description ................................................Missile:Data ...........................................................Description ................................................Resupply flow ...........................................Section protective covers and shields ....Sections ....................................................Missile assembly simulated count (MASC)missile section trainers ..............................Missile section trainers:Missile assembly simulated count(MASC) ...................................................Modified tactical (MT)..............................Missile simulator ES-1 .................................Modes of transportation ..............................Modified tactical (MT) missile sectiontrainers ........................................................Nomenclature cross-reference list ..............Operation. typical .........................................Operational deployment (Chapter 3) ..........Operational range ........................................P&P shop data ............................................Packaginglpreservation (P&P) shop, supplyand:Data ...........................................................Description ................................................Parts, repair, shop:Data ...........................................................Description ................................................PCC data .....................................................PCC trainer ..................................................Platoon control central (PCC):Data ...........................................................Description ................................................Power distribution equipment, CAS site ....Protective covers and shields, missilesection ........................................................Radio terminal set ANmRC-184 .................Range. operational .......................................RParagraph PageIndex 1

RAPU data ...................................................Rear area power unit (RAPU):Data ...........................................................Description ................................................Recode test set, S&A .................................Records, and reports, maintenance formsReference scene generation facility.(RSGF):Data ...........................................................Description ................................................References (Appendix A) ............................Repair parts shop:Data ................................... .......................Description ................................................Repair shop, electrical:Data ...........................................................Description ................................................Repair shop, mechanical:Data ...........................................................Description ................................................Reporting equipment improvementrecommendations (EIR).............................Reporting errors and recommendingimprovements .............................................Reports, maintenance forms, records, andRequisition flow, resupply ...........................Resupply flow, missile .................................Resupply requisition flow ............................RSGF data ...................................................RSGF trainer ................................................SS&A recode test set ....................................Safety considerations ...................................Satellite communications terminal AN/MSG-64 .......................................................Scope ............................................................SCTS data ...................................................SCTS filter assembly ...................................SCTS trainer ................................................Second stage countdown trainer ................Section protective covers and shields,missile .........................................................Sections, missile ..........................................Shelter, facilitized electrical equipment:Data ...........................................................Description ................................................Shields, missile section protective coversand ..............................................................Shipping and storage containers:Data ...........................................................Description ................................................Shop, electrical repair:Data ...........................................................Description ................................................INDEX . ContinuedParagraph PageShop. mechanical repair:Data. ..........................................................Description ................................................Shop. repair parts:Data ...........................................................Description ................................................Shop. supply and packagingipreservation(Pap):Data ...........................................................Description ................................................Simulator:GlEU .........................................................Missile. ES-1 ............................................Warhead functional. (WFS) .....................Stockpile-to-firing battery sequence ............Storage containers. shipping and:Data ...........................................................Description ................................................Supply and packaging/preservation (P&P)shop:Data ...........................................................Description ................................................System components test station (SCTS):Data ...........................................................Description ................................................TTest set. S&A recode .................................Tool kits ........................................................Tractor. EL ...................................................Trainers:Countdown trainers. first and second stageMissile assembly simulated count(MASC) missile section .........................Modified tactical (MT) missile section ....PCC ...........................................................RSGF ........................................................SCTS .........................................................Trajectory. typical .........................................Transportation. modes of ............................Transportation vehicles:Data ...........................................................Description ................................................Typical operation ..........................................Typical trajectory ..........................................vVan. combat alert status (CAS):Data ...........................................................Description ................................................Vehicles. transportation:Data ...........................................................Description ................................................WWarhead functional simulator (WFS) .........30 kW generator ..........................................60 kW generator ..........................................Paragraph PageIndex 2

By Order of the Secretary of the Army:Official:JOHN A. WICKHAM, JRGeneral, United States AmyChief of StuffR. L. DILWORTHBrigadier General, United States ArmyThe Adjutant GeneralDistribution:To be distributed in accordance with DA Form 12-32, Operator Maintenance requirementsfor PERSHING I1 Missile System.

-PARA-GRAPH-FIGURENO9- 5-TABLENOPUBLlCn I ION TITLEUnit of Radar Set7 Sep 72 AN/MPQ-50 Tested at the HFCPUBLICATION DATEIN THlS SPACE TELL WHAT IS WRONGAND WHAT SHOULD BE DONE ABOUT IT:"B" Ready Relay K11 is shown with two #3 contacts.That contact which is wired to pin 8 of relay K16should be changed to contact #lo.; tep1 C21-2Reads: Hultimeter B indicates 600 K ohms to 9000K ohms.Change to read: Multimeter B indicates 600 K ohmsminimum.Reason: Circuit being checked could measure infinity.Multimeter can read above 9000 K ohms and still becorrect.NOTE TO Th'E READER:Your comments IJ.SZZ go directly to the r?Ltsrresponsible for this manual, and he wi.22 preparethe reply that is returned to you. To help him inhis evaluation of your recomen&tions, please explainthe reason for each of your recommendations, unlessthe reason is obvious.All comme~ts will be appreciated, and will be givenimmediate attention. Harzdw~Ltten comments areacceptab le .For your convenience, blank "tear out " forms,prep~hzted, addressed, and ready to mail, are includedin this manual.FORM PREVIOUS EDITIONS P S --IF YOUR OUTFIT WANTS TO KNOW ABOUT YOUR1 JUL 79 ARE OBSOLETE.RECOMMENDATION MAKE A CARBON COPY OF THISAND GIVE IT TO YOUR HEADQUARTERS

-'PIN-POINT WHERE IT ISPhRA-GRAPH-TABLENOIPUBLICATION DATEPUBLICA I iON TITLEIN THIS SPACE TELL WHAT IS WRONGAND WHAT SHOULD BE DONE ABOUT IT:k3R TITLE AN0 TELEI PMO. .PREVIOUS EDITiONSARE OBSOLETE.P S --iF YOUR OUTFIT WANTS TO KNOW ABOUT YOURRECOMMENDATION MAKE A CARBON COPY OF THISAND GIVE IT TO YOUR HEADOUARTERS

REVERSE OF DA FORY 2021-2DEPARTMENT OF THE ARMYPOSTAGE AND FEES PAIDDCPARTMENT OF THE ARMYDO0 314OCClClAL DUSINESSCCNALTY COR PRlVATt USE $300CommanderU.S. Army Missile CommandATTN: AMSMI-LC-ME-PMRedstone Arsenal, AL 35898-5239

-PrrRA-GPAPUFIGL RENC-E IT IS-TABLENOIN THIS SPACE TELL WHAT IS WRONGAND WHAT SHOULD BE DONE ABOUT IT:-OR TITLE

REVERSE Of DA FORY 2028-2UNIT'S AOORESSDECARTMtNT OF THE ARMYOC.CIC1AL BUSINESSPCNALTV roc) PRIVATE USE $300FOLD BACK----_.------_.--- -----_..-fPOSTAGE AND FEES PAIDDEPARTMENT OF THE ARMYDO0 314CommanderU.S. Army Missile CommandATTN : A.MSM1-LC-ME-PMRedstone Arsenal, AL 35898-5235*EmEIII1IIiIIIIIIII11III1I

-PARA-GPAPHI PUBLICATION DATEPUBLICA I ION TITLEIIN THIS SPACE TELL WHAT IS WRONGAND WHAT SHOULD BE DONE ABOUT IT:

REVERSE OF DA FORM 2028-2FILL IN YOURUNIT'S AOORESSDEPARTMENT OF THE ARMYPOSTAGO: AND FEES PAIDDEPARTMENT OF THO: ARMYDOD 314OlllCl AL DUSINCSSPENALTY FOR PRlVATI USC 8100CommanderU.S. Army Missile CommandATTN : AMSMX-LC-ME-PMRedstone Arsenal, AL 35898-5238

Pershing II Weapon System - Pershing Professionals Organization

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?