How to Measure Wheel Offset

Co-authored by Howard Fleischmann

Last Updated: April 6, 2024 References

The wheel offset is simply the distance from a tire’s center line to the hub’s mounting surface. It’s very easy to calculate a vehicle’s wheel offset, but you will need to remove the tire to do it. Knowing the wheel offset is important for ensuring that you purchase compatible tires whenever you want to replace or upgrade them. Whether you’re looking to get new tires for functional or stylistic reasons, it’s crucial to check the wheel offset first.

Get Car Support Solve Any Problem

Hi there! Do you have a question about how to diagnose or fix a problem with your car? I’ve read the manual so you don’t have to. Select your make, model, and year, then ask away!

*

Part 1

Part 1 of 2:

Finding the Center Line

Download Article

If the tire is still on your vehicle, then you will need to remove the lug nuts and tire from the vehicle first. First, use a jack or hydraulic lift to get the vehicle off the ground and into a safe position. Then, remove the lug nuts and pull off the tire. Place the tire on the ground with the back of the tire facing upwards.^{[1]
X
Research source}

Safety Precaution: Make sure to follow general safety precautions for removing a tire from your car. Turn off the car, wear safety glasses, and disable any automatic start features on the vehicle before you begin.^{[2]
X
Research source}
2
Lay a straight edge ruler across the center of the tire. Position the straight edge so that it lays flat over the wheel. Ensure the middle of the straight edge is directly over the hub of the wheel.^{[3]
X
Research source}
- The hub is the metal part in the center of the wheel.
Advertisement
3
Measure from the floor to the bottom of the straight edge. Place a ruler or tape measure perpendicular to the straight edge near the center of the wheel. Position the straight edge so it is near the center of the hub with 1 end touching the floor under your tire. Then, look at the ruler or measuring tape to find the measurement at the bottom of the straight edge that's laid across the tire.^{[4]
X
Research source}
- For example, the measurement from the floor to the bottom of the straight edge might be 244 mm (9.6 in).
- Use a straight edge ruler that has millimeter measurements on it to get the most precise measurement possible. If you don’t have a straight edge with millimeter measurements, multiply the measurement in inches by 25.4 to convert it into millimeters.
4
Divide the measurement by 2 to find the center line. Take the floor to straight edge measurement and halve to get the measurement for the centerline of the tire. You will need this number to calculate the offset.^{[5]
X
Research source}
- For example, if the measurement was 244 mm (9.6 in), then the center line measurement is 122 mm (4.8 in).

Part 2

Part 2 of 2:

Calculating the Offset

Download Article

1
Measure from the hub to the bottom of the straight edge. Next, reposition the ruler or measuring tape so that 1 end is against the hub in the center of the wheel). Position the other end against the straight edge laying flat across the tire.^{[6]
X
Research source}
- For example, the distance from the straight edge to the hub might be 172 mm (6.8 in).
2
Subtract the center line from the hub distance measurement. The resulting number is your offset. Record or remember this number for future reference.^{[7]
X
Research source}
- For example, if you got 172 mm (6.8 in) for the hub and 122 mm (4.8 in) for the center line, then your final number would be 50 mm (2.0 in).
- If you got a hub measurement of 100 mm (3.9 in) and a center line measurement of 122 mm (4.8 in), then your final number would be −22 mm (−0.87 in).
3
Note whether the number is positive, negative, or zero. The offset is considered positive if it’s a positive number, negative if it’s a negative number, and zero if the number is 0. You may need to know the offset of your vehicle’s wheels to ensure that you purchase the correct type of wheels.^{[8]
X
Research source}
- For example, if you have a front-wheel drive car, then you might need to get positive offset wheels with a specific measurement.
- Or, you might be interested in getting negative offset wheels or “deep dish” wheels to complement your car’s design, but there may be a limit to how deep you can go according to your car’s specifications.
Tip: The offset is negative if the center line measurement is bigger than the hub measurement. A calculator will also tell you if the result is positive or negative.

References

Expert Q&A

Search

Add New Question

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

If you are unsure about what type of wheels to purchase for your vehicle after determining the offset, consult with a mechanic or auto body shop.

Thanks
Helpful 0 Not Helpful 1