Sheva Alomar - Resident Evil 5 - Female Chracter 3D print model

When you download you will have 15 Stl Files ( 2 GB )

Full Parts

1.Sheva Alomar Figur 2.Sheva Alomar Base 3.Full Body With Base

Disassembled Parts

1.Sheva Upper Body Disassembled 2.Sheva Base Disassembled 3.Sheva Right Hand With Gun Disassembled 4.Sheva Head Disassembled 5.Sheva Left Leg Disassembled 6.Sheva Right Leg Disassembled

Flat Cut Parts

1.Sheva Upper Flat Cut 2.Sheva Base Flat Cut 3.Sheva Right Hand With Gun Flat Cut 4.Sheva Head Flat Cut 5.Sheva Left Leg Flat Cut 6.Sheva Right Leg Flat Cut

This product is Nuskul Art Collectible Edition. Designed using 3D Max and Zbrush. -It is a detailed product that can be easily printed.

When you download you will have 15 Stl Files ( 1,7 GB )

Full Parts

1.Sheva Alomar Figur 2.Sheva Alomar Base 3.Full Body With Base

Disassembled Parts

1.Sheva Upper Body Disassembled 2.Sheva Base Disassembled 3.Sheva Right Hand With Gun Disassembled 4.Sheva Head Disassembled 5.Sheva Left Leg Disassembled 6.Sheva Right Leg Disassembled

Flat Cut Parts

1.Sheva Upper Flat Cut 2.Sheva Base Flat Cut 3.Sheva Right Hand With Gun Flat Cut 4.Sheva Head Flat Cut 5.Sheva Left Leg Flat Cut 6.Sheva Right Leg Flat Cut

This product is Nuskul Art Collectible Edition. Designed using 3D Max and Zbrush. -It is a detailed product that can be easily printed.

Follow me for more models You can send me a message about the model or in general. You can also reach me via social media.

Twitter : https://twitter.com/YunusKullebi Instagram: https://www.instagram.com/yunuskullebi/ Instagram : https://www.instagram.com/nuskulart/ Linktr : https://linktr.ee/yunuskullebi Instagram : https://www.instagram.com/nuskulart/ Linktr : https://linktr.ee/yunuskullebi

Print Temperature : : 205 Table Temperature : 60 Layer Height : 0.2 mm Intıal Layer Heigt : 0.2 mm Wall Line Count : 0.4 mm Fill Density : % 20

Support Settings

Support Stracture : Tree Maximum Branch Angle : 60 Branch Diameter : 3 Trunk Diameter : 16 Branch Diameter Angle : 5 Support Placement : Everywhere Prefferred Branch Angle : 25 Diameter İncrase to Model : 1 Minimum Height to Model : 3 Intial Layer Diameter : 6 Branch Destinty : 20 Tip Diameter : 0.8 Limit Branch Reach : Yes Optimal Branch Range : 30 Rest Preference : On Model if Required Support Overhang Angle : 55 Support Pattern : Gyroid Connect Support Lines : Yes Support Density : 5 Support Line Distance : 8 Intial Layer Support Line Distance :8 Support interface Thicknes : 1.2