amplifiers

"; var end = "

Hosted by www.Geocities.ws

"; var thing ="A
M
P
L
I
F
I
E
R
S"; function otsikko(text) { parent.white.document.bgColor = "#0C0E52"; parent.white.document.bgColor = "white"; parent.frames["white"].document.open("text/html"); parent.frames["white"].document.write(text); parent.frames["white"].document.close(); }

AutoStudio Amplifiers

Technical information:	��B-2002 ��	��B-504 ��
Power to 4 ohm RMS (W)	2x200	4x50
Power to 2 ohm RMS (W)	2x300	4x70
Bridged to 4 ohm RMS	1x500	2x130
Frequency response: 20hz-20Khz �0.5dB	X	X
THD in announced power: < 0.5 %	X	X
Signal to Noise ration: >90 dB	X	X
Channel separation: > 50 dB	X	X
Max power consumption:	90 A	50 A
Filters ON/OFF-switch	X	X
Highpass frequences	-	100
Lowpass frequences	40-300	80
Bass boost: +6 dB	X	X
Gold Plated RCA-jacks	X	X
Hi-level Input	X	X
Weight (Kg)	3,8	3,3
Width 215, height 65, lenght:	400	350

Autostudio B-504

In the moment B-504 drives only 6�" coax CW's, but later I will use it also to drive 6�" component system

Autostudio B-2002

B-2002 amplifies the signal to subwoofer. Amplifier gives in bridged-mode 500 watts, so it should be enough for the subwoofer. Amplifier works also as a an heater in the backcontainer, because it gets quite hot, quite fast in use.

AutoStudio

Hosted by www.Geocities.ws